100% PASS RATE NCSIE ONTAP NS0-184 Certified Exam DUMP with 60 Questions
Updates For the Latest NS0-184 Free Exam Study Guide!
The NS0-184 exam is a challenging test that requires a thorough understanding of NetApp ONTAP storage systems. NS0-184 exam covers a wide range of topics, including installation and configuration of NetApp ONTAP software, storage provisioning, networking, and data protection. Candidates must have a strong understanding of storage technologies and protocols, as well as a solid understanding of networking concepts and technologies.
Network Appliance NS0-184 is an advanced certification program designed for IT professionals who want to demonstrate their expertise in NetApp storage installation and configuration. It is a highly respected certification program that is recognized globally and is widely regarded as a benchmark for excellence in the IT industry. The NetApp Certified Storage Installation Engineer, ONTAP certification program is designed to validate the technical skills and knowledge of IT professionals in the installation and configuration of NetApp storage systems.
NEW QUESTION # 12
After completing the installation of an AFF A800 ONTAP AI cluster, you are asked which contacts are available for additional help in obtaining immediate assistance in solving P1 issues.
In this scenario, what do you tell the customer?
- A. Use Guided Problem Solving.
- B. Contact NetApp Support using chat.
- C. Contact NetApp Support by telephone.
- D. Use the NetApp KB TV channel.
Answer: C
NEW QUESTION # 13
You need to install a cluster with a FAS2720 HA pair and a FAS8300 HA pair.
Which NetApp tool will verify which cluster interconnect switches support this configuration?
- A. mysupport.netapp.com site
- B. Hardware Universe (HWU)
- C. Active IQ Config Advisor
- D. Interoperability Matrix Tool (IMT)
Answer: B
NEW QUESTION # 14
Click the Exhibit button.
Referring to the exhibit, what information is forwarded to syslog after you enter the scripted install commands? (Choose two.)
- A. SNMP traps
- B. command history
- C. AutoSupport messages
- D. EMS messages
Answer: B,C
NEW QUESTION # 15
Your customer wants a newly installed AFF C190 cluster to send SNMP notifications to a trap host called OVERWATCH01.
In this scenario, which two statements are correct? (Choose two.)
- A. Configure a firewall policy and allow SNMP.
- B. Configure a trap host on the cluster.
- C. Configure an SNMP community string on the cluster.
- D. Configure DNS on the cluster.
Answer: B,D
NEW QUESTION # 16
Which logical interface has a fixed firewall policy?
- A. cluster management LIF
- B. cluster LIF
- C. intercluster LIF
- D. data LIF
Answer: B
NEW QUESTION # 17
After the installation of a new ONTAP 9.8 cluster, you have to verify if AutoSupport works.
In this scenario, which two commands would you use to accomplish this task? (Choose two.)
- A. system node autosupport destination show
- B. system node autosupport history show
- C. system node autosupport invoke
- D. system node autosupport check show
Answer: B,D
NEW QUESTION # 18
You must replace a FAS2750 switchless cluster with an AFF A220 switchless cluster for a customer. The customer requires that you transfer the data from the FAS2750 cluster to the AFF A220.
In this scenario, which two methods would you use to migrate the customer's data? (Choose two.)
- A. Provide cluster switches and build a 4-node cluster, then use the vol move command.
- B. Remove all of the HDD drives from the FAS cluster and install them into the AFF cluster.
- C. Establish an SVM-DR relationship between the two clusters and activate the destination SVM.
- D. Install SAS cables between the two clusters and use the vol move command.
Answer: A,D
NEW QUESTION # 19
You have a 2-node FAS8300 ONTAP 9.8 cluster that serves SMB shares. You are configuring interface groups for higher performance and resiliency.
Which two NetApp best practices should you follow to satisfy these performance and resiliency requirements? (Choose two.)
- A. Use ports with different chipsets.
- B. Use ports from different NICs.
- C. Use ports from the same NICs.
- D. Use ports with the same chipsets.
Answer: B,D
NEW QUESTION # 20
You installed a new pair of Cisco 92300YC cluster switches at a customer's site. Before you install any files on the switch, you want to view the current configuration.
In this scenario, which command would you use to accomplish this task?
- A. show running-config
- B. switchcfgshow
- C. config show
- D. fabricshow
Answer: B
NEW QUESTION # 21
You installed two separate clusters in an isolated data center without outbound network access. The customer wants to troubleshoot issues locally and also create custom Excel reports for capacity utilization from a local server.
In this scenario, which NetApp tool would satisfy this requirement?
- A. Active IQ Unified Manager
- B. Active IQ Digital Advisor
- C. Cloud Insights
- D. ONTAP System Manager
Answer: A
NEW QUESTION # 22
You have just racked a new 6-node switched cluster with ONTAP 9.7. You need to configure the cluster switches.
In this scenario, which two elements would be used to complete the configuration? (Choose two.)
- A. rlogin
- B. serial port
- C. SFP+ port
- D. SSH
Answer: B,D
NEW QUESTION # 23
Click the Exhibit button.
You plan to install a new ONTAP cluster at a customer site by using the new ONTAP System Manager 9.7 GUI.
Referring to the exhibit, what must you do before you provision initial storage?
- A. Configure protocols.
- B. Configure aggregates.
- C. Configure a remote tier.
- D. Configure cluster LIFs.
Answer: B
NEW QUESTION # 24
You are installing an AFF A700 system with two disk shelves using ADPv2. After setting up the cluster, you realize that one drive shelf was powered off and that the drives have not been assigned to any of the nodes.
In this scenario, which two resources will help you find a solution? (Choose two.)
- A. NetApp Knowledge Base
- B. Active IQ Digital Advisor
- C. Active IQ Config Advisor
- D. NetApp Documentation Center
Answer: A,C
NEW QUESTION # 25
Which two statements are true about the LIFs that are used for a cluster peer relationship? (Choose two.)
- A. The LIFs must be in dedicated broadcast domains an IPspaces.
- B. The LIFs must use the default intercluster service policy.
- C. At least one LIF per node is required on each cluster.
- D. The MTU size must be set to 9000 bytes on all the LIFs used for the cluster peering.
Answer: A,B
NEW QUESTION # 26
You have a 4-node ONTAP 9.8 cluster with a FAS8700 HA pair that serves iSCSI LUNs. You are adding a new AFF A250 HA pair to the cluster with new iSCSI SAN LIFs. You need to allow non-optimized data paths from the AFF A250 nodes to the existing LUNs on the FAS8700 nodes.
In this scenario, which two ONTAP configuration settings must you verify? (Choose two.)
- A. port sets
- B. failover groups
- C. reporting nodes
- D. switch zoning
Answer: A,B
NEW QUESTION # 27
Click the Exhibit button.
As shown in the exhibit, you have an 8-node ONTAP 9.7 cluster. You are asked to set up a SnapMirror volume relationship between node-1 and node-8 in the same cluster.
In this scenario, which two network components are used by the SnapMirror volume? (Choose two.)
- A. client network
- B. private network
- C. management LIFs
- D. cluster LIFs
Answer: B,D
NEW QUESTION # 28
You are deploying a new AFF All SAN Array A250 into a customer's existing data fabric.
In this scenario, which two tools would give insight into their existing Cisco MDS fabric configuration? (Choose two.)
- A. Cisco Data Center Network Manager (DCNM)
- B. Active IQ Config Advisor
- C. Brocade SAN Health
- D. Active IQ
Answer: A,D
Explanation:
Reference:
https://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-x-series-modular-system/flex-pod-datacenter-ucs-intersight.html
NEW QUESTION # 29
Click the Exhibit button.
During an ONTAP cluster handover procedure, your customer asks how to identify and solve issues that might occur on the newly deployed array.
Referring to the exhibit, which two widgets would the customer use to help with these issues? (Choose two.)
- A. Active IQ
- B. Guide Me
- C. Contracts and Warranties
- D. ASE Corner
Answer: B,C
NEW QUESTION # 30
You have completed a base installation and system registration of an AFF A250 system, but you notice that you have one failed drive. Neither "un-failing" nor reseating the drive helped to repair it. You must ensure proper replacement of the failed drive.
In this scenario, which two actions should you take? (Choose two.)
- A. Run Active IQ Config Advisor to collect all the logs on the system.
- B. Power off the system until the drive has been replaced.
- C. Ask the customer for a drive with the same capacity and replace it.
- D. Ask the customer to open a technical case with NetApp Support.
Answer: A,C
NEW QUESTION # 31
A storage administrator is trying to upgrade a pair of FAS2520s with internal SATA storage to a new 2-node FAS8300 cluster. The storage administrator wants to preserve the existing data.
In this scenario, which two capabilities are available to the storage administrator? (Choose two.)
- A. the ability to convert the FAS2520s to disk shelves and attach them to the new nodes
- B. the ability to pull out the tray of internal disks of the FAS2520s and reseat the tray in the internal storage of the FAS8300s
- C. the ability to move the volumes from the old nodes to the new nodes
- D. the ability to create a 4-node MetroCluster across the four nodes
Answer: A,D
NEW QUESTION # 32
Click the Exhibit button.
A customer has two Cisco 40GbE data switches. They want to connect the switches to an AFF A400 HA pair. The switches and the AFF A400 are approximately seven meters apart.
Referring to the exhibit, which two supported actions would allow you to accomplish this task? (Choose two.)
- A. Change the requirement for Ethernet cables.
- B. Relocate the switches or the AFF A400 so that the distance is less than five meters.
- C. Change the requirement for optical cables.
- D. Install 10 meter NetApp supported copper cables.
Answer: A,D
NEW QUESTION # 33
You have a 2-node FAS8300 switchless ONTAP 9.8 cluster that serves NAS volumes. You have a data SVM that connects to the network using multimode LACP with VLAN tags.
In this scenario, which front-end FAS8300 network port would you create the data LIFs?
- A. a0a-100
- B. e0e
- C. e0e-100
- D. a0a
Answer: B
NEW QUESTION # 34
......
The NS0-184 certification exam is an essential step for IT professionals seeking to become NetApp Certified Storage Installation Engineers with expertise in ONTAP. NetApp Certified Storage Installation Engineer, ONTAP certification provides a valuable credential that validates the candidate's skills and knowledge in installing and managing NetApp ONTAP storage systems. With NetApp's comprehensive training and resources, candidates can prepare for the exam and take their careers to the next level.
Best NS0-184 Exam Preparation Material with New Dumps Questions https://www.practicematerial.com/NS0-184-exam-materials.html
Fast Exam Updates NS0-184 dumps with PDF Test Engine Practice https://drive.google.com/open?id=1fkezsd8NyWRJm4iOOQ53noflTX_WACEW
