Easily To Pass New Network Appliance NS0-592 Dumps with 67 Questions
Latest NS0-592 Study Guides 2021 - With Test Engine PDF
NetApp NS0-592 Exam Topics:
| Section | Objectives |
|---|---|
| Protocols | -Demonstrate knowledge of ONTAP NAS configurations -Demonstrate knowledge of ONTAP SAN configurations |
| Performance | -Describe ONTAP performance concepts -Demonstrate knowledge of troubleshooting ONTAP performance |
| Software-defined ONTAP Solutions | -Describe software-defined ONTAP solutions |
| ONTAP OS | -Describe the tools available for support or troubleshooting -Demonstrate knowledge of ONTAP cluster administration -Demonstrate knowledge of data replication issues -Describe the structure of ONTAP OS -Demonstrate knowledge of how to troubleshoot ONTAP OS -Demonstrate knowledge of how to handle panic events |
| Hardware | -Demonstrate knowledge of hardware troubleshooting -Demonstrate knowledge of troubleshooting SP or BMC -Describe the hardware components in a Fibre Channel environment -Demonstrate knowledge of the cluster interconnect infrastructure -Describe MetroCluster configurations |
NEW QUESTION 11
Click the exhibit button.
You are troubleshooting a system in which the customer reports that aggregates on Stack 6c/12b are having slow response tomes from system NETAPP1CLUS-02.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. The aggregates have only one PHY running at six gigabits per second on 6c.
- B. PHY 2 is running at six gigabits per second; on system NETAPP1CLUS-02, reseat IOM6 Module A on Shelf 10.
- C. The aggregates have only PHY at six gigabits per second on 12b.
- D. The shelf module firmware is downrev; on system NETAPP1CLUS-02, replace IOM6 Module A on Shelf 10.
Answer: A,D
NEW QUESTION 12
Click the exhibit button.
You are investigating an AutoSupport Disk Redundancy Failed alert. Cluster A lost connectivity to storage bridge BrB1, while cluster B lost connectivity to storage bridge BrA1.
Referring to the exhibit, which three components need investigation? (Choose three.)
- A. FC switch SwB1
- B. ISL cables
- C. FC switch SwA2
- D. storage bridges BrB1
- E. FC switch SwA1
Answer: A,B,E
NEW QUESTION 13
Which statement is correct about the wafliron command?
- A. The wafliron command is used to correct parity inconsistencies.
- B. The wafliron command is used to correct WAFL i2p inconsistencies.
- C. The wafliron command is used to correct inconsistent user data blocks.
- D. The wafliron command is used to correct inconsistent WAFL metadata.
Answer: D
NEW QUESTION 14
Click the exhibit button.
A customer reports that their system recently began logging an error.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. A user is attempting to restart the ntpd daemon.
- B. The spmd application failed to restart the ntpd daemon.
- C. The bcomd application is responsible for monitoring the observed behavior.
- D. The ntpd daemon is responsible for time services.
Answer: A,D
NEW QUESTION 15
Click the exhibit button.
Your customer reports that their FAS2554A system reports multi-path HA when running the sysconfig command. However, Config Advisor reports an error about incorrect cabling.
What are the two reasons for the messages? (Choose two.)
- A. Disk shelves 10 and 20 are cabled incorrectly to each other.
- B. Shelves 10 and 20 have different IOM modules and must be in separate stacks.
- C. The DS2246 shelf is wrong; the shelf ID must be 11.
- D. The FAS2554 system is cabled incorrectly to shelf ID 20.
Answer: A,D
NEW QUESTION 16
Click the exhibit button.
A customer is reporting that numbers in the statistics volume show command output appear to be incorrect.
Referring to the exhibit, which statement is correct?
- A. There are operation types that are not listed in the output.
- B. The problem is due to a difference in operation size.
- C. Perfstat should be used to explain the behavior.
- D. A case with NetApp should be raised to find the root cause.
Answer: B
NEW QUESTION 17
Click the exhibit button.
A customer has the ns-switch shown in the exhibit.
Which two statements are true in this scenario? (Choose two.)
- A. Groups can be looked up both in the local database and in LDAP.
- B. Host names are always resolved using the configured DNS server.
- C. User mapping decisions are always based on the LDAP configuration.
- D. User names not present in the local database are looked up in LDAP.
Answer: A,B
NEW QUESTION 18
Click the exhibit button.
You have just cabled a new shelf to a FAS8200. Running the system node run -node * sysconfig - a command indicates that multipath HA is configured. However, after running Config Advisor, you receive an error that your cabling is incorrect.
As indicated in the exhibit, which two actions will correct the cabling? (Choose two.)
- A. Move the 0b SAS connection on the bottom controller to 0d on the bottom controller.
- B. Move the 0b SAS connection on the top controller to 0d on the top controller.
- C. Move the 0b SAS connection on the top controller to 0d on the bottom controller.
- D. Move the 0b SAS connection on the bottom controller to 0d on the top controller.
Answer: A,B
NEW QUESTION 19
After you replaced the motherboard, the node stopped in the "waiting for the cluster application to come online" state.
Which two actions should you perform to troubleshoot this problem? (Choose two.)
- A. Verify the setting of the cluster interconnect switch.
- B. Verify that the physical links on the cluster ports are up.
- C. Check the status of the cluster with the cluster ring show command.
- D. Check the status of the HA with the interconnect-up field of storage failover show command.
Answer: C,D
NEW QUESTION 20
A customer complains that the copy offload does not work when copying large file from a Windows 8 client between the CIFS shares that are hosted on the same ONTAP cluster.
What are two reasons for this problem? (Choose two.)
- A. The client should be using Windows 10 for ODX support.
- B. SMB 3.0 disabled on the CIFS SVM.
- C. The source and target volumes reside on different cluster nodes.
- D. Deduplication is not enabled on the destination volume.
Answer: B,D
NEW QUESTION 21
A reboot was performed by a watchdog reset on the node.
In this scenario, which statement is true?
- A. The service processor no longer responds.
- B. The wafl_check command should be executed.
- C. In case of an L2 watchdog event, determine whether a core was dumped.
- D. In case of an L1 watchdog event, determine whether a panic message was recorded.
Answer: A
NEW QUESTION 22
A customer mentions that their intercluster SnapMirror replication operations consistently take much longer than normal. While troubleshooting, you want to initiate a test SnapMirror session to collect performance data.
How would you accomplish this task?
- A. Use the ifstat command to collect network performance data for the physical interface.
- B. Run the network test-path command to simulate a SnapMirror connection and record the latency/throughput data.
- C. Run the network statistics lif show command for the intercluster LIF to simulate a network connection.
- D. View the active network connections to the node to see if there a large number of active connections.
Answer: B
NEW QUESTION 23
Click the exhibit button.
A customer has an FC SAN with brocade switches. Each server attached to the SAN gas four FC ports. The customer describes that one of their servers has only four paths to the LUNs configured on the cluster. There should be eight paths on all the other servers. The switch administrator has verified the zone configuration.
Referring to the exhibit, which two actions would you perform to troubleshoot the problem? (Choose two.)
- A. Review the igroup configuration on the cluster.
- B. Review that the host side FC link ports are enabled.
- C. Review the driver version on the server.
- D. Review the LIF configuration on the cluster.
Answer: C,D
NEW QUESTION 24
A customer reports that OnCommand Performance Manager shows that the workload on node-02 in a 4-node cluster has increased to a level that is higher than the threshold. The customer wants to avoid this issue becoming a performance problem.
Which two actions would result in achieving this goal? (Choose two.)
- A. Use the volume move command to move one or more volumes to another aggregate that is owned by another node that is less utilized.
- B. Use the storage aggregate scrub command to verify the parity on the busy aggregates.
- C. Physically move the shelf to another node that is less utilized.
- D. Use the storage aggregate relocation command to offload an aggregate to its partner.
Answer: A,C
NEW QUESTION 25
Click the exhibit button.
Referring to the exhibit, which change is required to enable the CIFS Autolocation function for the Users share?
- A. Change the CIFS share's Symlink Properties parameter to symlinks.
- B. Modify the CIFS server's option to enable SMB multichannel.
- C. Edit the CIFS share's properties to remove the changenotify property.
- D. Re-create the LIFs to allow both CIFS and NFS protocols.
Answer: A
NEW QUESTION 26
A customer is attempting to move from NFSv3 to NFSv4.x and reports that all attempts to mount using NFSv3 continue to be successful, however, all of their NFSv4.x mount attempts fail with an "access denied" error.
Which two statements would cause this error? (Choose two.)
- A. The export policy applied to the SVM's root volume does not allow the NFSv4 clients to access it.
- B. The export policy applied to the data volume does not allow clients to access it using NFSv4.
- C. The NFS server does not have NFSv4 enabled.
- D. The SVM's root volume allows execute access for all users.
Answer: B,D
NEW QUESTION 27
End users are complaining of high latency when accessing an ONTAP 9 luster.
Which command helps you to determine whether there is a storage component that is contributing to this problem?
- A. qos statistics performance show
- B. wafltop show -v -cpu -I 10 -c 5-n 6
- C. sysstat -c 30 -M 1
- D. qos statistics latency show
Answer: A
NEW QUESTION 28
In a 4-node cluster, nodes 1 and 2 are an HA pair, and nodes 3 and 4 are an HA pair. The following error appears in the log.
12/15/2018 15:48:47 node-2CRITICALclam.node.ooq: Node (name=node- 2, ID= 1001) is out of "CLAM quorum" (reason =quorum update).
In this scenario, which two statements are correct? (Choose two.)
- A. Node 2 takes over node 1.
- B. All LUNs are offline in the cluster.
- C. All LUNs are online in the cluster.
- D. Node 1 takes over node 2.
Answer: B,D
NEW QUESTION 29
At a customer site, the storage failover giveback command fails when giving back the root aggregate.
What would be two reasons for this failure? (Choose two.)
- A. There are active SIS operations running.
- B. There are failed disks.
- C. There are active NFS connections.
- D. The HA interconnect is not operational.
Answer: B,D
NEW QUESTION 30
Click the exhibit button.
A customer's system reported several errors. There was no disruption, but the customer is concerned about the system's health.
Referring to the exhibit, which statement is true?
- A. One of the switches has failed.
- B. Port 1D on the system has failed.
- C. One of the IOM modules on shelf 20 has failed.
- D. Storage redundancy is degraded.
Answer: D
NEW QUESTION 31
Click the exhibit button.
A customer notifies you that Active IQ is showing a warning that a broadcast domain in their environment has been configured with ports from multiple VLANs.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. A VLAN tag cannot be assigned to the e0M port, so the configuration is acceptable.
- B. You should move the e0M ports to a Broadcast Domain that is dedicated to only management traffic.
- C. You should configure e0M so that is tagged on VLAN 40.
- D. You should change the LIF service policy to net-intercluster to prevent the LIFs from failing over to the e0M ports.
Answer: C,D
NEW QUESTION 32
An administrator wants to keep an automatic daily up-to-date copy of a volume at a disaster recovery location.
What should the administrator do to achieve this goal?
- A. Configure a SyncMirror relationship to the remote location.
- B. Perform an NDMP dump to the remote location.
- C. Configure a SnapMirror relationship to the remote location.
- D. Perform a volume relocation to the remote location.
Answer: C
NEW QUESTION 33
You have a 2-node ONTAP Select HA deployment. In this scenario, which application manages the quorum, if one node fails?
- A. vCenter Server
- B. ONTAP Deploy VM
- C. ONTAP Mediator
- D. Tiebreaker
Answer: B
NEW QUESTION 34
When you issue a volume clone create command, which entity in WAFL is copied?
- A. the buftree
- B. the data block
- C. the inode file
- D. the vol_info block
Answer: C
NEW QUESTION 35
A non-maskable interrupt event occurs. The system panics and then reboots.
In this scenario, what would have caused the panic?
- A. a secd process
- B. a watchdog timer
- C. a volume location distributed database
- D. an ICMP blackhole detector
Answer: B
NEW QUESTION 36
......
NetApp NS0-592 Exam Certification Details:
| Exam Registration | PEARSON VUE |
| Passing Score | 62% |
| Recommended Training | ONTAP Troubleshooting (ILT) |
| Sample Questions | NetApp NS0-592 Sample Questions |
| Exam Price | $150 USD |
| Number of Questions | 60 |
| Exam Name | Support Engineer ONTAP Specialist |
| Duration | 120 minutes |
| Exam Code | NS0-592 NCSE ONTAP |
NS0-592 Dumps and Exam Test Engine: https://www.practicematerial.com/NS0-592-exam-materials.html
