Easy To Download CIPS L5M9 Exam Dumps Updated 124 Questions [Q26-Q41]

Share

Easy To Download CIPS L5M9 Exam Dumps Updated 124 Questions

New Updated L5M9 Exam Questions 2026

NEW QUESTION # 26
Which of the following are considered 'transformed resources' and an input into the Operations Process (input- processoutput)?
Select THREE

  • A. customers
  • B. employees
  • C. money
  • D. information
  • E. raw materials

Answer: A,D,E

Explanation:
Customers, Raw Materials and Information are inputs. This is from p.44-45. Raw materials is the obvious one- it's the input in manufacturing and is transformed into a finished good. Information is an input in the service industry- for example a lawyer or an accountant requires information in order to prepare their case. Customers is the other correct answer and is an input in things like hairdressing (you can't cut hair without a customer's head!). Employees are considered transforming inputs not transformed resources (p.45). Money is also not an input as it isn't converted into an output.


NEW QUESTION # 27
Companies that have high-visibility processes require higher levels of customer management skills than companies with low-visibility processes. Is this TRUE?

  • A. no- low visibility companies must focus on increasing levels of customer service
  • B. yes- high visibility companies often have lower operating costs because of this
  • C. no- all companies require customer management skills
  • D. yes- high visibility companies often have higher operating costs because of this

Answer: D

Explanation:
Firstly, the sentence is true, so you can discount options 3 and 4. A high-visibility company is one where customers see the operating process. Examples include education- students sit in the classroom so see the teaching process, and the postal service, where customers receive notifications of when parcels will be delivered. Low-visibility means the customer doesn't see the operating process, so an example of this would be agriculture or manufacturingcustomers just see the end result. Where customers see the process, companies require higher levels of customer management skills. Between options 1 and 2, 1 is correct - this is a direct quote from p.50. Where you have highvisibility, you will likely need to employ more staff, deal with customers on the phone/ in person and companies will probably have more complaints- all of which cost money.


NEW QUESTION # 28
Bilal is an Operations Manager at an apple pie manufacturer and is currently undertaking an Aggregate Capacity Analysis.
What is the purpose of this?

  • A. It will help Bilal assess if he is working within the allocated budget
  • B. It will give Bilal an overall evaluation of the company's ability to meet demand fluctuations
  • C. It will tell Bilal if he has the correct number of apples he needs to produce the desired number of apple pies
  • D. It will help Bilal decide if he needs to hire more workers in the short term to ensure the factory produces enough apple pies to meet demand

Answer: B

Explanation:
Aggregate Capacity Analysis looks as medium-term capacity to see whether supply can match demand. This is from p.23. Aggregate means 'from a group or cluster' and therefore requires quite a few bits of data. For this reason option 1 is incorrect as this describes a very short term look at capacity analysis.


NEW QUESTION # 29
Below are details of 4 local manufacturing companies. For each company you must decide what the main objective is for the organisation and what layout their manufacturing plant has.
Company 1: This company creates large, delicate products which are hard to move. The main aim of the company is to stand out from competitors due to the superior level of materials used and by using the latest forms of technology to create the items.
Company 2: This company produces 72 different items and has designated zones within its premises for the creation of each item. The zones are organised based on the technology used and some products may be passed between different zones to be completed. The company creates many different items in response to changing customer demands, with many product lines only lasting a single season.
Company 3: Company 3 creates one product which flows along a single production line, with staff members adding to the product on four different occasions. The company must produce a high volume of this singular product in order to break even. Therefore, there is always a steady flow of items through the plant and it is important there is no stoppage in production.
Company 4: This company produces small batches of products, as and when they are ordered by customers. Due to uncertainty in demand, a high profit margin is added to the cost of each item. Teams in the factory are grouped into different areas depending on the technological process they are using.
Complete the table below by listing the objective criteria and plant layout for each company. Each response should only be used once: flexibility, speed, quality, cost, functional layout, cell layout, product layout, fixed-position layout

Which of the following will you put into box 5?

  • A. fixed-position layout
  • B. functional layout
  • C. cell layout
  • D. product layout

Answer: A

Explanation:
The correct answers are as follows:


NEW QUESTION # 30
Below are details of 4 local manufacturing companies. For each company you must decide what the main objective is for the organisation and what layout their manufacturing plant has.
Company 1: This company creates large, delicate products which are hard to move. The main aim of the company is to stand out from competitors due to the superior level of materials used and by using the latest forms of technology to create the items.
Company 2: This company produces 72 different items and has designated zones within its premises for the creation of each item. The zones are organised based on the technology used and some products may be passed between different zones to be completed. The company creates many different items in response to changing customer demands, with many product lines only lasting a single season.
Company 3: Company 3 creates one product which flows along a single production line, with staff members adding to the product on four different occasions. The company must produce a high volume of this singular product in order to break even. Therefore, there is always a steady flow of items through the plant and it is important there is no stoppage in production.
Company 4: This company produces small batches of products, as and when they are ordered by customers. Due to uncertainty in demand, a high profit margin is added to the cost of each item. Teams in the factory are grouped into different areas depending on the technological process they are using.
Complete the table below by listing the objective criteria and plant layout for each company. Each response should only be used once: flexibility, speed, quality, cost, functional layout, cell layout, product layout, fixed-position layout

Which of the following will you put into box 7?

  • A. fixed-position layout
  • B. product layout
  • C. functional layout
  • D. cell layout

Answer: B

Explanation:
The correct answers are as follows:


NEW QUESTION # 31
Which of the following are operations management activities? Select THREE

  • A. capacity planning
  • B. development of new products
  • C. process selection
  • D. job design
  • E. materials management

Answer: A,C,E

Explanation:
1 2 and 4 are correct. Development of New Products would be the activity of the R&D department, and job design the activity of HR. There is a list of 10 Operations Management activities on p.12


NEW QUESTION # 32
Below are details of 4 local manufacturing companies. For each company you must decide what the main objective is for the organisation and what layout their manufacturing plant has.
Company 1: This company creates large, delicate products which are hard to move. The main aim of the company is to stand out from competitors due to the superior level of materials used and by using the latest forms of technology to create the items.
Company 2: This company produces 72 different items and has designated zones within its premises for the creation of each item. The zones are organised based on the technology used and some products may be passed between different zones to be completed. The company creates many different items in response to changing customer demands, with many product lines only lasting a single season.
Company 3: Company 3 creates one product which flows along a single production line, with staff members adding to the product on four different occasions. The company must produce a high volume of this singular product in order to break even. Therefore, there is always a steady flow of items through the plant and it is important there is no stoppage in production.
Company 4: This company produces small batches of products, as and when they are ordered by customers. Due to uncertainty in demand, a high profit margin is added to the cost of each item. Teams in the factory are grouped into different areas depending on the technological process they are using.
Complete the table below by listing the objective criteria and plant layout for each company. Each response should only be used once: flexibility, speed, quality, cost, functional layout, cell layout, product layout, fixed-position layout

Which of the following will you put into box 3?

  • A. flexibility
  • B. cost
  • C. quality
  • D. speed

Answer: D

Explanation:
The correct answers are as follows:


NEW QUESTION # 33
A manufacturing company makes taps which they advertise with a guarantee of durability for 10 years. At which point in time would you expect most defects to be found?

  • A. Within the first year
  • B. between 1-2 years
  • C. between 2-5 years
  • D. between 5-6 years

Answer: A

Explanation:
The correct answer is within the first year. Failure rates is depicted as a 'bathtub' curve- most defects are found right at the beginning of an item's lifespan, and right at the end. This is why option 1 is correct. See p.94 for more details.


NEW QUESTION # 34
Below are details of 4 local manufacturing companies. For each company you must decide what the main objective is for the organisation and what layout their manufacturing plant has.
Company 1: This company creates large, delicate products which are hard to move. The main aim of the company is to stand out from competitors due to the superior level of materials used and by using the latest forms of technology to create the items.
Company 2: This company produces 72 different items and has designated zones within its premises for the creation of each item. The zones are organised based on the technology used and some products may be passed between different zones to be completed. The company creates many different items in response to changing customer demands, with many product lines only lasting a single season.
Company 3: Company 3 creates one product which flows along a single production line, with staff members adding to the product on four different occasions. The company must produce a high volume of this singular product in order to break even. Therefore, there is always a steady flow of items through the plant and it is important there is no stoppage in production.
Company 4: This company produces small batches of products, as and when they are ordered by customers. Due to uncertainty in demand, a high profit margin is added to the cost of each item. Teams in the factory are grouped into different areas depending on the technological process they are using.
Complete the table below by listing the objective criteria and plant layout for each company. Each response should only be used once: flexibility, speed, quality, cost, functional layout, cell layout, product layout, fixedposition layout

Which of the following will you put into box 8?

  • A. fixed-position layout
  • B. functional layout
  • C. cell layout
  • D. product layout

Answer: B

Explanation:
The correct answers are as follows:


NEW QUESTION # 35
Which of the following is a benefit to a company of introducing TQM?

  • A. increased customer loyalty
  • B. improved supplier relations
  • C. benchmarking is made easier
  • D. higher profit margins

Answer: A

Explanation:
Increased customer loyalty is a benefit of TQM (p.107). This is because the focus of TQM is customer satisfaction and this in turn will lead to customer loyalty.


NEW QUESTION # 36
At Red Glass Ltd a strategy has been developed by the Operations Department to reduce costs and streamline supply chain operations. This is being incorporated into the organisation's overarching corporate strategy. What is the name given to this type of strategy development?

  • A. bottom- up
  • B. value engineering
  • C. structure-related strategy
  • D. lean

Answer: A

Explanation:
The correct answer is bottom-up. There are 2 forms of strategy development: top down and bottom up. Bottom up is when a department within an organisation makes a strategy and it is passed up the ladder for implementation. Top down is the opposite (it is filtered down the ladder from senior management to individual departments). See p.42.


NEW QUESTION # 37
Tools by Tom is a manufacturer of hardware. They have recently advertised that a new range of hammers would be released shortly, however due to issues in the supply chain and a low-quality delivery of steal, the production of the new hammers has been put on hold. Of the following, which are internal impacts of failure for the company? Select TWO.

  • A. wasted resources
  • B. loss of credibility
  • C. customer complaints
  • D. downtime
  • E. decreased market share

Answer: A,D

Explanation:
3 and 4 are internal impacts of failure- the others are external. See p.93 for more information.


NEW QUESTION # 38
Spotted Elephant Ltd is a confectionary manufacturer whose operations department is headed by Brian. Brian is looking into Total Quality Management and ways of implementing this in the factory. He is considering the introduction of Total Productive Maintenance. What would this involve?

  • A. introducing quality assurance processes for the confectionary items produced
  • B. servicing the machinery more frequently
  • C. using a pull inventory system
  • D. business process re-engineering

Answer: B

Explanation:
2 is the correct answer. The Total Productive Maintenance approach is about ensuring machinery is always at fulloperating power. In order to do this, the machinery will need to be serviced more frequently. See p.109


NEW QUESTION # 39
Little Joy Ltd is a large company with several functional departments. Below are details of four departments. For each, you must decide which functional area of the business the department is, as well as the SERVQUAL Gap that each Department Lead is concerned with.
Department 1: This department is concerned with the creation of products. The products are created in line with BS EN 716-1 and undergo vigorous tests before they leave the factory. Many customers are unaware of the additional costs of testing to BS EN 716-1 and complain about the price of this product line.
Department 2: Other departments of the business are internal customers of this functional area and approach the Department Lead when they require something to be bought. Often the internal customers have unrealistic expectations of the timescales involved in the process and the Department Lead spends a lot of time explaining lead times and logistics.
Department 3: This functional area creates the budgets for the company and emails these to the Department Leads at the beginning of every quarter. Due to the complexity of the documents, other functional areas of the business often don't understand the information provided.
Department 4: This area of the business is concerned with revenue, which has recently slumped. The Department Lead is conducting market surveys to find out the reason for this.
Complete the table below by listing the Functional Area of the business, and the corresponding SERVQUAL Gap. Each response should only be used once: procurement, finance, sales, production, satisfaction gap, delivery gap, standards gap, communication gap.

Which of the following will you put into box 6?

  • A. satisfaction gap
  • B. communication gap
  • C. standards gap
  • D. delivery gap

Answer: D

Explanation:
The correct answers are as follows:


NEW QUESTION # 40
Little Joy Ltd is a large company with several functional departments. Below are details of four departments. For each, you must decide which functional area of the business the department is, as well as the SERVQUAL Gap that each Department Lead is concerned with.
Department 1: This department is concerned with the creation of products. The products are created in line with BS EN 716-1 and undergo vigorous tests before they leave the factory. Many customers are unaware of the additional costs of testing to BS EN 716-1 and complain about the price of this product line.
Department 2: Other departments of the business are internal customers of this functional area and approach the Department Lead when they require something to be bought. Often the internal customers have unrealistic expectations of the timescales involved in the process and the Department Lead spends a lot of time explaining lead times and logistics.
Department 3: This functional area creates the budgets for the company and emails these to the Department Leads at the beginning of every quarter. Due to the complexity of the documents, other functional areas of the business often don't understand the information provided.
Department 4: This area of the business is concerned with revenue, which has recently slumped. The Department Lead is conducting market surveys to find out the reason for this.
Complete the table below by listing the Functional Area of the business, and the corresponding SERVQUAL Gap. Each response should only be used once: procurement, finance, sales, production, satisfaction gap, delivery gap, standards gap, communication gap.
Little Joy Ltd is a large company with several functional departments. Below are details of four departments. For each, you must decide which functional area of the business the department is, as well as the SERVQUAL Gap that each Department Lead is concerned with.
Department 1: This department is concerned with the creation of products. The products are created in line with BS EN 716-1 and undergo vigorous tests before they leave the factory. Many customers are unaware of the additional costs of testing to BS EN 716-1 and complain about the price of this product line.
Department 2: Other departments of the business are internal customers of this functional area and approach the Department Lead when they require something to be bought. Often the internal customers have unrealistic expectations of the timescales involved in the process and the Department Lead spends a lot of time explaining lead times and logistics.
Department 3: This functional area creates the budgets for the company and emails these to the Department Leads at the beginning of every quarter. Due to the complexity of the documents, other functional areas of the business often don't understand the information provided.
Department 4: This area of the business is concerned with revenue, which has recently slumped. The Department Lead is conducting market surveys to find out the reason for this.
Complete the table below by listing the Functional Area of the business, and the corresponding SERVQUAL Gap. Each response should only be used once: procurement, finance, sales, production, satisfaction gap, delivery gap, standards gap, communication gap.

Which of the following will you put into box 4?

  • A. production
  • B. sales
  • C. finance
  • D. procurement

Answer: B

Explanation:
The correct answers are as follows:


NEW QUESTION # 41
......

Updated Free CIPS L5M9 Test Engine Questions with 124 Q&As: https://www.practicematerial.com/L5M9-exam-materials.html

The Best CIPS Level 5 Advanced Diploma in Procurement and Supply L5M9 Professional Exam Questions: https://drive.google.com/open?id=15UY8rXObLpZhD0jnlCT-Vww-_McvDPtW