Get 100% Success with Latest VCP-VMC 2022 2V0-33.22 Exam Dumps Apr 26, 2023
The Best 2V0-33.22 Exam Study Material and Preparation Test Question Dumps
NEW QUESTION 29
Which solution would an administrator use to manage the lifecycle operations of Tanzu Kubernetes clusters?
- A. VMware Tanzu Kubernetes Grid
- B. VMware vSphere Lifecycle Manager
- C. VMware Tanzu Observability by Wavefront
- D. VMware Tanzu Service Mesh
Answer: B
NEW QUESTION 30
A cloud administrator is asked to validate a proposed internetworking design that will provide connectivity to a VMware Cloud on AWS environment from multiple company locations.
The following requirements must be met:
* Connectivity to the VMware Cloud on AWS environment must support high-throughput data transfer.
* Connectivity to the VMware Cloud on AWS environment must NOT have a single point of failure.
* Any network traffic between on-premises company locations must be sent over a private IP address space.
Which design decisions should be made to meet these network connectivity requirements?
- A. * Configure a Direct Connect from headquarters to VMware Cloud on AWS.
* Use a private VIF for this connection.
* Configure a secondary, standby Direct Connect from headquarters using a public VIF.
* Configure dual, redundant, policy-based IPsec VPN connections from each regional office to VMware Cloud on AWS.
B * Configure a Direct Connect from headquarters to VMware Cloud on AWS.
* Use a public VIF for this connection.
* Configure a route-based IPsec VPN tunnel as a secondary method of connectivity from headquarters to VMware Cloud on AWS.
* Configure dual, redundant, route-based IPsec VPN connections from each regional office to VMware Cloud on AWS. - B. * Configure a Direct Connect from headquarters to VMware Cloud on AWS.
* Use a private VIF for this connection.
* Configure a route-based IPsec VPN tunnel as a secondary method of connectivity from headquarters to VMware Cloud on AWS, taking care to enable the "Use VPN as Backup to Direct Connect" option.
* Configure dual, redundant, route-based IPsec VPN connections from each regional office to VMware Cloud on AWS. - C. * Configure a Direct Connect from headquarters to VMware Cloud on AWS.
* Use a private VIF for this connection.
* Configure a policy-based IPsec VPN tunnel as a secondary method of connectivity from headquarters to VMware Cloud on AWS, taking care to enable the "Use VPN as Backup to Direct Connect" option.
* Configure dual, redundant, policy-based IPsec VPN connections from each regional office to VMware Cloud on AWS.
Answer: B
NEW QUESTION 31
Which three functions are provided by the components within the Kubernetes control plane? (Choose three.)
- A. Stores Kubernetes cluster data in a key-value data store.
- B. Watches the API for changes and responds with appropriate actions.
- C. Stores and distributes container images.
- D. Configures network rules to route traffic to containers within the Kubernetes cluster.
- E. Balances pods across the nodes within a Kubernetes cluster.
- F. Ensures that containers are running in a pod.
Answer: A,B,E
Explanation:
https://kubernetes.io/docs/concepts/overview/components/#control-plane-components
NEW QUESTION 32
Which two Tanzu Kubernetes Grid service component must an administrator configure within VMware Cloud to enable to deploy a namespace or their Kubernetes Application developments? (Choose two)
- A. Tanzu Kubernetes Cluster
- B. Tanzu Application Platform
- C. Management cluster
- D. Tanzu Service Mesh
- E. Tanzu Observability by Wavefront
Answer: A,C
Explanation:
Tanzu Kubernetes Grid is a service from VMware Cloud that enables customers to deploy and manage Kubernetes applications in the cloud. In order to deploy a namespace or their Kubernetes Application developments, an administrator must configure a Tanzu Kubernetes Cluster and a Management Cluster.
A Tanzu Kubernetes Cluster is a cluster of nodes that are used to run applications and services. The nodes are connected to the Management Cluster, where administrators can manage and monitor deployments.
The Management Cluster is a cluster of nodes that are used to manage and monitor the Tanzu Kubernetes Cluster nodes. It provides the tools to manage and monitor deployments, as well as to configure and maintain the Tanzu Kubernetes Cluster nodes.
According to VMware's official website, "Tanzu Kubernetes Grid is a service that provides a simplified way to deploy and manage Kubernetes applications in the cloud. It provides a single control plane for managing multiple Kubernetes clusters, allowing customers to easily deploy and manage their applications across multiple clusters and environments." [1]
[1] https://www.vmware.com/products/tanzu-kubernetes-grid.html
NEW QUESTION 33
A customer identifies consumption-based ransomware protection as a primary business requirement. Which VMware solution offers long-term immutable point-in-time recovery options?
- A. VMware Cloud Disaster Recovery
- B. VMware Site Recovery
- C. VMware vSphere Data Protection
- D. VMware vSphere Replication
Answer: A
Explanation:
The VMware solution that offers long-term immutable point-in-time recovery options is VMware Cloud Disaster Recovery (CDR). CDR offers continuous data protection and point-in-time recovery options with up to 30 days of retention. It also provides a secure and immutable copy of your data that is stored in the cloud and can be used to recover from ransomware attacks.
NEW QUESTION 34
A cloud administrator is In the process of troubleshooting a non-compliant object. How can the administrator change a VM storage policy for an ISO image?
- A. Modify the default VM storage policy.
- B. Apply a new VM storage policy.
- C. Modify the default VM storage policy and recreate the ISO image.
- D. Attach the ISO Image to a virtual machine.
Answer: A
Explanation:
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.storage.doc/GUID-D6A099C5-8F80-474C-A79A-64F5EC4455DA.html
NEW QUESTION 35
Which two service management tasks In VMware Cloud on AWS are performed by VMware? (Choose two.)
- A. Creation and configuration of VPC during the software-defined data center (SDDC) deployment
- B. Notifications sent before a regular update
- C. Updates to VMware hardware compatibility
- D. Capacity management of the cloud software-defined data centers (SDDCs)
- E. Updates to the software-defined data center (SDDC) software
Answer: D,E
NEW QUESTION 36
Which three factors should a cloud administrator consider when sizing a new VMware Cloud software-defined data center (SDDC) to support the migration of workloads from an on-premises SDDC? (Choose three.)
- A. Total number of 10Gb network ports required
- B. Total number of on-premises hosts
- C. Average size of workload resources (CPU & RAM)
- D. Total amount of available storage across all on-premises datastores
- E. Host hardware type in the target VMware Cloud
- F. Total number of workloads
Answer: A,C,F
Explanation:
When sizing a new VMware Cloud software-defined data center (SDDC) to support the migration of workloads from an on-premises SDDC, a cloud administrator should consider the total number of workloads, the average size of workload resources (CPU & RAM), and the total number of 10Gb network ports required. The total number of workloads will help determine the total number of hosts and the amount of CPU and RAM resources that will be needed to support the workloads. The average size of workload resources (CPU & RAM) will help ensure that the resources available in the SDDC are sufficient to meet the demands of the workloads. Finally, the total number of 10Gb network ports required will help determine the number of network switches and the types of ports that will be needed to support the workloads. The host hardware type in the target VMware Cloud, the total number of on-premises hosts, and the total amount of available storage across all on-premises datastores are not factors that should be considered when sizing an SDDC.
NEW QUESTION 37
In VMware Cloud Disaster Recovery (VCDR), a protection group consists of which two components? (Choose two.)
- A. VM customizations
- B. Clusters
- C. Policies for snapshots
- D. Members
- E. Virtual Machine File System (VMFS) datastores
Answer: C,D
NEW QUESTION 38
A customer needs to set up a self-managed VDI solution that can be deployed to any VMware Cloud. Which two VMware solutions can meet this requirement? (Choose two.)
- A. VMware Horizon
- B. VMware Workspace ONE Access
- C. VMware ThinApp
- D. VMware Dynamic Environment Manager (DEM)
- E. VMware Workspace ONE Unified Endpoint Management (UEM)
Answer: A,B
NEW QUESTION 39
A cloud administrator requires an external secure connection into their data center to use Border Gateway Protocol (BGP). Which connection type can they use to connect to an Instance of VMware Cloud?
- A. Private L2 virtual private network (VPN)
- B. Route-based virtual private network (VPN)
- C. Policy-based virtual private network (VPN)
- D. Public IPs over the Internet
Answer: B
Explanation:
https://docs.vmware.com/en/VMware-Cloud-Disaster-Recovery/services/vmware-cloud-dr-security-best-practices/GUID-BCC03463-437B-4DBE-BE21-0D43D5BA5776.html
NEW QUESTION 40
What are two incident management services included in the VMware Cloud on AWS service management process? (Choose two)
- A. Microsoft License management
- B. Incident Management
- C. VMware Tools management
- D. Workload OS management
- E. Capacity management
Answer: B,E
Explanation:
The two incident management services included in the VMware Cloud on AWS Service Management process are Incident Management and Capacity Management.
Incident Management is responsible for detecting, classifying, and resolving incidents quickly and effectively. It includes monitoring and alerting, incident response, and problem management. Capacity Management is responsible for predicting, measuring, and managing the capacity of the infrastructure. It includes capacity planning, performance analysis, and resource optimization.
NEW QUESTION 41
In VMware Cloud Disaster Recovery (VCDR), a protection group consists of which two components? (Choose two.)
- A. VM customizations
- B. Clusters
- C. Policies for snapshots
- D. Members
- E. Virtual Machine File System (VMFS) datastores
Answer: C,D
Explanation:
https://docs.vmware.com/en/VMware-Cloud-Disaster-Recovery/services/vmware-cloud-disaster-recovery/GUID-11C83D2A-A478-4823-B9B3-275AF6DD31CC.html
NEW QUESTION 42
As per company policy, all administrator level accounts need to have their password changed on a regular basis. The [email protected] account password is changed by an administrator from the vSphere Client.
Another administrator is using the credentials in the VMware Cloud console and gets an 'access denied' error.
What could be the problem?
- A. The password change email confirmation has NOT been approved by the organization owner.
- B. The password should only be changed through the VMware Cloud console.
- C. The new password is NOT synchronized with the password that is displayed for the Default vCenter user account.
- D. The password should be changed by escalation of privileges.
Answer: C
Explanation:
The problem could be that the new password is not synchronized with the password that is displayed for the Default vCenter user account. The administrator must make sure that the same password is used in both the vSphere Client and the VMware Cloud console in order for the user to access the account. Changing the password in one place does not automatically change it in the other, so this must be done manually.
NEW QUESTION 43
A cloud administrator successfully configures a policy-based VPN between an on-premises data center and an instance of VMware Cloud Software-defined data center (SDDC). Although the workloads are reachable from both locations over the IP network, the cloud virtual machines cannot access an on-premises web service. What should the cloud administrator check first to resolve this issue?
- A. On-premises DNS settings
- B. VMware Cloud gateway settings
- C. On-premises gateway settings
- D. VMware Cloud DNS settings
Answer: D
Explanation:
https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws-networking-security/GUID-586C053D-9553-461E-B6A8-FF508C8F091C.html
NEW QUESTION 44
A Cloud Administrator is responsible for which three of the listed operations in VMware Cloud on AWS? (Choose three.)
- A. VMware Tools Updates
- B. Guest Operating System Updates
- C. VMware vCenter Server Updates
- D. Hardware Bios / Firmware Updates
- E. Network Connectivity
- F. VMWare NSX Manager Updates
Answer: B,D
NEW QUESTION 45
A cloud administrator is managing a VMware Cloud on AWS environment containing of a single cluster with three hosts. Which acts recovery site for the on-premises environment. The on-premises environment consists of eight hosts. what should the cloud administrator configure to optimize scaling for full disaster recovery?
- A. Configure an Elastic DRS policy and set the maximum cluster Size to 8.
- B. Configure an Elastic DRS policy and set minimum cluster size to 8.
- C. Configure an Elastic DRS policy and select 'Optimize for Rapid scale-out'.
- D. No Additional configuration is required Default Elastic DRS will fulfill the requirement
Answer: C
Explanation:
According to the VMware official documentation, in order to optimize scaling for full disaster recovery in a VMware Cloud on AWS environment, it is necessary to configure an Elastic DRS policy and select 'Optimize for Rapid scale-out' as the policy type. This option allows for a rapid increase in the number of hosts within the cluster, which is necessary for full disaster recovery. For more information, please refer to the VMware Cloud on AWS Disaster Recovery Guide, which can be found here: https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/VMware-Cloud-on-AWS-Disaster-Recovery-Guide.html.
NEW QUESTION 46
A cloud administrator is asked to validate a proposed internetworking design that will provide connectivity to a VMware Cloud on AWS environment from multiple company locations. The following requirements must be met:
- A. Connectivity the VMware Cloud on AWS environment must NOT have a single point of failure.
- B. Connectivity the VMware Cloud on AWS environment must support high-throughput data transfer.
- C. Any network traffic between on-premises company locations must be sent over a private IP address space.
Answer: B
NEW QUESTION 47
......
VMware 2V0-33.22 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
Get Ready to Pass the 2V0-33.22 exam Right Now Using Our VCP-VMC 2022 Exam Package: https://www.practicematerial.com/2V0-33.22-exam-materials.html
Enhance Your Career With Available Preparation Guide for 2V0-33.22 Exam: https://drive.google.com/open?id=1v9tKKDjVVv2bDgVIYAvS6WGREWSWX1P2
