Get Real 200-301 Quesions Pass Cisco Certification Exams Easily
200-301 Dumps are Available for Instant Access
Cisco 200-301 certification exam is offered in multiple languages and is available worldwide. It is a computer-based exam that consists of multiple-choice questions and simulates real-world scenarios. 200-301 exam duration is 120 minutes, and the passing score is 825 out of 1000. 200-301 exam fee varies depending on the candidate's location and currency, and it is subject to change.
To prepare for the Cisco 200-301 exam, you can take advantage of the various study materials provided by Cisco, including books, online courses, and practice exams. It is essential to devote enough time and effort to studying for 200-301 exam to ensure that you are fully prepared to pass it. Passing the Cisco 200-301 exam is an excellent way to boost your career prospects in the networking field and gain recognition for your skills and knowledge.
NEW QUESTION # 494
Refer to the exhibit.
An engineer executed the script and added commands that were not necessary for SSH and now must remove the commands.
- A. administrative distance
- B. metric
- C. longest prefix
- D. cost
Answer: A
NEW QUESTION # 495
Refer to the exhibit.
A network engineer must configured communication between PC A and the File Server. To prevent interruption for any other communications, which command must be configured?
- A. Switchport trunk allowed vlan none
- B. Switchport trunk allowed vlan add 13
- C. Switchport trunk allowed vlan remove 10-11
- D. Switch trunk allowed vlan 12
Answer: A
NEW QUESTION # 496
Refer to the exhibit.
Traffic sourced from the loopback0 Interface is trying to connect via ssh to the host at 10.0.1.15. What Is the next hop to the destination address?
- A. 192.168.0.4
- B. 192.168.3.5
- C. 192.168.0.7
- D. 192.168.0.40
Answer: A
NEW QUESTION # 497
Drag and drop the REST API call method for HTTP from the left onto the action they perform on the right.
Answer:
Explanation:
NEW QUESTION # 498
Which HTTP status code is returned after a successful REST API request?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 499
Refer to the exhibit.
Which switch in this configuration will be elected as the root bridge?
- A. SW3
- B. SW2
- C. SW4
- D. SW1
Answer: D
NEW QUESTION # 500
Refer to the exhibit.
A static route must be configured on R14 to forward traffic for the 172 21 34 0/25 network that resides on R86 Which command must be used to fulfill the request?
- A. ip route 172.21.34.0 255.255.128.0 10.73.65.64
- B. ip route 172.21.34.0 255.255.255.128 10.73.65.66
- C. ip route 172.21.34.0 255.255.255.0 10.73.65.65
- D. ip route 172.21.34.0 255.255.255.192 10.73.65.65
Answer: B
NEW QUESTION # 501
which command must you enter to guarantee that an HSRP router with higher priority becomes the HSRP primary router after it is reloaded?
- A. standby 10 priority
- B. standby 10 preempt
- C. standby 10 version 1
- D. standby version 2
Answer: B
NEW QUESTION # 502
In QoS, which prioritization method is appropriate for interactive voice and video?
- A. expedited forwarding
- B. traffic policing
- C. low-latency queuing
- D. round-robin scheduling
Answer: C
NEW QUESTION # 503
Refer to the exhibit. An administrator must configure interfaces Gi1/1 and Gi1/3 on switch SW11 PC-1 and PC- 2 must be placed in the Data VLAN and Phone-1 must be placed in the Voice VLAN.
Which configuration meets these requirements?
- A. Option D
- B. Option B
- C. Option C
- D. Option A
Answer: C
NEW QUESTION # 504
What is the Layer 2 encapsulation for Ethernet?
- A. 802.1q
- B. ARPA
- C. SSL
- D. RTP
Answer: B
NEW QUESTION # 505
On a live network, which two commands will verify the operational status of router interfaces?
(Choose two.)
- A. Router# show interfaces
- B. Router# debug interface
- C. Router# show start
- D. Router# show ip interface brief
- E. Router# show ip protocols
Answer: A,D
NEW QUESTION # 506
Which value can you modify to configure a specific interface as the preferred forwarding interface?
- A. The interface number
- B. The hello time
- C. The port priority
- D. The VLAN priority
Answer: C
Explanation:
Section: Network Access
NEW QUESTION # 507
Refer to the exhibit. Which two configurations must the engineer apply on this network so that R1 becomes the DR? (Choose two.)
- A. R1(config)#interface fastethernet 0/0
R1(config-if)#ip ospf priority 0 - B. R1(config)#interface fastethernet 0/0
R1(config-if)#ip ospf priority 200 - C. R3(config)#interface fastethernet 0/0
R3(config-if)#ip ospf priority 0 - D. R1(config)#router ospf 1
R1(config-router)#router-id 192.168.100.1 - E. R3(config)#interface fastethernet 0/0
R3(config-if)#ip ospf priority 200
Answer: B,C
Explanation:
R1 must have the Highest priority, and thus R3 a low or lowest Priority.
NEW QUESTION # 508
Which attribute does a router use to select the best path when two or more different routes to the same destination exist from two different routing protocols?
- A. hop count
- B. administrative distance
- C. dual algorithm
- D. metric
Answer: B
Explanation:
Section: IP Connectivity
NEW QUESTION # 509
Drag and drop the IPv6 address types from the left onto their description on the right.
Answer:
Explanation:
NEW QUESTION # 510 
Refer to the exhibit. An extended ACL has been configured and applied to router R2. The configuration failed to work as intended. Which two changes stop outbound traffic on TCP ports 25 and 80 to 10.0.20.0/26 from the 10.0.10.0/26 subnet while still allowing all other traffic? (Choose two.)
- A. Add a "permit ip any any" statement at the end of ACL 101 for allowed traffic
- B. The source and destination IPs must be swapped in ACL 101
- C. Add a "permit ip any any" statement to the begining of ACL 101 for allowed traffic.
- D. The ACL must be configured the Gi0/2 interface inbound on R1
- E. The ACL must be moved to the Gi0/1 interface outbound on R2
Answer: A,B
NEW QUESTION # 511
A packet is destined for 10.10.1.22. Which static route does the router choose to forward the packet?
- A. ip route 10.10.1.16 255.255.255.252 10.10.255.1
- B. ip route 10.10.1.0 255.255.255.240 10.10.255.1
- C. ip route 10.10.1.20 255.255.255.254 10.10.255.1
- D. ip route 10.10.1.20 255.255.255.252 10.10.255.1
Answer: D
NEW QUESTION # 512
Drag and drop the threat-mitigation techniques from the left onto the types of threat or attack they mitigate on the right.
Answer:
Explanation:
Explanation
Double-Tagging attack:In this attack, the attacking computer generates frames with two 802.1Q tags. The first tag matches the native VLAN of the trunk port (VLAN 10 in this case), and the second matches the VLAN of a host it wants to attack (VLAN 20).When the packet from the attacker reaches Switch A, Switch A only sees the first VLAN 10 and it matches with its native VLAN 10 so this VLAN tag is removed. Switch A forwards the frame out all links with the same native VLAN 10. Switch B receives the frame with an tag of VLAN 20 so it removes this tag and forwards out to the Victim computer.Note: This attack only works if the trunk (between two switches) has the same native VLAN as the attacker.To mitigate this type of attack, you can use VLAN access control lists (VACLs, which applies to all traffic within a VLAN. We can use VACL to drop attacker traffic to specific victims/servers) or implement Private VLANs.ARP attack (like ARP poisoning/spoofing) is a type of attack in which a malicious actor sends falsified ARP messages over a local area network as ARP allows a gratuitous reply from a host even if an ARP request was not received. This results in the linking of an attacker's MAC address with the IP address of a legitimate computer or server on the network. This is an attack based on ARP which is at Layer 2.Dynamic ARP inspection (DAI) is a security feature that validates ARP packets in a network which can be used to mitigate this type of attack.
NEW QUESTION # 513
......
Get Instant Access REAL 200-301 DUMP Pass Your Exam Easily: https://www.practicematerial.com/200-301-exam-materials.html
Practice with these 200-301 dumps Certification Sample Questions: https://drive.google.com/open?id=1njlDqlWLcKjJB-6Zmh9HQqwbKyZRGX8s
