Instant Download NSE4_FGT-6.4 Dumps Q&As Provide PDF&Test Engine
Fast Exam Updates NSE4_FGT-6.4 dumps with PDF Test Engine Practice
How to Prepare For Network Security Professional (Fortinet NSE4_FGT-6.4) Professional Exam
Preparation Guide for Network Security Professional (Fortinet NSE4_FGT-6.4) Professional Exam
Introduction for Network Security Professional (Fortinet NSE4_FGT-6.4) Professional Exam
This guide provides a step by step framework of the Network Security Professional (Fortinet NSE4_FGT-6.4) Professional course exam including a broad array of essentials of the test, the exam design, themes, test complexities and readiness techniques, and the intended interest group profile. Thus, we prepare various FORTINET NSE4_FGT-6.4 exam dumps as we understand understudy determinations. Our content, helps candidates total assessments.
Fortinet released its initial product, FortiGate, a firewall, in 2002, succeeded by anti-spam and anti-virus software. FortiGate was upgraded to use application-specific integrated circuit (ASIC) architecture.
The Network Security Professional designation recognizes your ability to install and manage the day-to-day configuration, monitoring, and operation of a FortiGate device to support specific corporate network security policies.
We recommend this exam for network and security professionals who are involved in the day-to-day management, implementation, and administration of a security infrastructure using FortiGate devices
Originally, the FortiGate was a material, rack-mounted product but later on, it became available also as a virtual appliance able to run on virtualization platforms like VMware vSphere. Fortinet also joined its network security offerings, including firewalls, anti-spam and anti-virus software, into a single product. Fortinet began developing its Security Fabric architecture in April 2016, so many network security products could communicate as one program. The same year, the company supplemented Security Information and Event Management (SIEM) products. In September 2016, the company declared it would combine the SIEM products with the security systems of other merchants.
The Network Security Professional (Fortinet NSE4_FGT-6.4) course identifies a person's capability to establish and maintain the day-to-day configuration, monitoring, and operation of a FortiGate device to carry out particular corporate network security policies.
If you are a customer or a public user, you must first create an account on the NSE Institute. You must use your company email address to register. You must purchase your training though your local distributor. If you are a partner, you must first create an account on the Partner Portal. You must use your company email address to register.
With 46,000+ active user certifications, the Fortinet Network Security Expert certification program is earning notable critical mass and industry attention. The value of the Fortinet NSE designation is verified every day by security specialists in the field and by trusted sources.
After finishing this course, the candidate will be able to:
- Manage network access to configured networks using firewall policies
- Utilize the GUI and CLI for management
- Deploy FortiGate devices as an HA cluster for fault tolerance and high performance
- Implement application control methods to monitor and control network applications that might use standard or non-standard protocols and ports
- Offer an SSL VPN for secure access to a private network
- Deploy the proper operation mode for any network
- Run packets using policy-based and static routes for multipath and load-balanced deployments
- Understand encryption uses and certificates
- Examine traffic transparently, forwarding as a Layer 2 device
- Deploy implicit and explicit proxy with firewall policies, authentication, and caching
- Configure SD-WAN to load balance traffic amid multiple WAN links efficiently
- Configure security profiles to offset threats and ill-usage, including viruses, torrents, and improper websites
- Execute a meshed or partially redundant VPN
- Recognize the features of the Fortinet Security Fabric
- Implement port forwarding, source NAT, and destination NAT
Use FORTINET NSE4_FGT-6.4 practice exam and FORTINET NSE4_FGT-6.4 practice exams to prepare for the exam.
Who should take the Network Security Professional (Fortinet NSE4_FGT-6.4) Professional Exam
A comprehensive range of The Network Security Professional (Fortinet NSE4_FGT-6.4) PROFESSIONAL exam dumps for Certification have been recognized. The truth that applicants need to prepare mindfully doesn't make endorsements easy. It needs some investment to earn from Fortinet professional course. Each exam includes answers and questions that help candidates complete their final assessment. You will complete the evaluation after you have taken the exam and taken it in our modules. Yet, it doesn't stop there; on account of our full aides, you will, in any situation, be admissible in your profession. You will deliver your results later on. To design any material for you, we have a high-level plan. In the progression of an object, we have utilized the most recent subtleties.
Hands-on experience is the most reliable form of preparation there is. Analyzing the exam guide for information about the competencies evaluated in the certification exam is a good practice to prepare for the certification.
- Camera position matters a lot. The candidate must sit in such a way that they appear in the middle of the screen and are clearly visible to the administrator
- Must have a phone and a government-issued document to validate your identity
- Perform the exam from a Windows or macOS machine, with a camera and microphone
- The candidate needs to have a room for the duration of the exam
NEW QUESTION 79
Which three options are the remote log storage options you can configure on FortiGate? (Choose three.)
- A. FortiSIEM
- B. FortiSandbox
- C. FortiCloud
- D. FortiCache
- E. FortiAnalyzer
Answer: A,B,E
NEW QUESTION 80
Why does FortiGate keep TCP sessions in the session table for some seconds even after both sides (client and server) have terminated the session?
- A. To remove the NAT operation.
- B. To allow for out-of-order packets that could arrive after the FIN/ACK packets.
- C. To finish any inspection operations.
- D. To generate logs
Answer: B
NEW QUESTION 81
Exhibit:
Refer to the exhibit to view the authentication rule configuration In this scenario, which statement is true?
- A. IP-based authentication is enabled
- B. Policy-based authentication is enabled
- C. Session-based authentication is enabled.
- D. Route-based authentication is enabled
Answer: C
NEW QUESTION 82
Refer to the exhibit to view the application control profile.
Users who use Apple FaceTime video conferences are unable to set up meetings.
In this scenario, which statement is true?
- A. The category of Apple FaceTime is being monitored.
- B. Apple FaceTime belongs to the custom monitored filter.
- C. Apple FaceTime belongs to the custom blocked filter.
- D. The category of Apple FaceTime is being blocked.
Answer: B
NEW QUESTION 83
Refer to the exhibit.
The global settings on a FortiGate device must be changed to align with company security policies. What does the Administrator account need to access the FortiGate global settings?
- A. Enable restrict access to trusted hosts
- B. Enable two-factor authentication
- C. Change password
- D. Change Administrator profile
Answer: B
NEW QUESTION 84
Examine the two static routes shown in the exhibit, then answer the following question.
Which of the following is the expected FortiGate behavior regarding these two routes to the same destination?
- A. FortiGate will use the port1 route as the primary candidate.
- B. FortiGate will only actuate the port1 route in the routing table
- C. FortiGate will route twice as much traffic to the port2 route
- D. FortiGate will load balance all traffic across both routes.
Answer: A
Explanation:
"If multiple static routes have the same distance, they are all active; however, only the one with the lowest priority is considered the best path."
NEW QUESTION 85
Refer to the exhibit.
Review the Intrusion Prevention System (IPS) profile signature settings. Which statement is correct in adding the FTP.Login.Failed signature to the IPS sensor profile?
- A. Traffic matching the signature will be allowed and logged.
- B. Traffic matching the signature will be silently dropped and logged.
- C. The signature setting uses a custom rating threshold.
- D. The signature setting includes a group of other signatures.
Answer: A
NEW QUESTION 86
Refer to the exhibit, which contains a static route configuration.
An administrator created a static route for Amazon Web Services.
What CLI command must the administrator use to view the route?
- A. get router info routing-table database
- B. get router info routing-table all
- C. diagnose firewall proute list
- D. get internet service route list
Answer: C
NEW QUESTION 87
Refer to the exhibit, which contains a static route configuration.
An administrator created a static route for Amazon Web Services.
What CLI command must the administrator use to view the route?
- A. get router info routing-table database
- B. diagnose firewall proute list
- C. get router info routing-table all
- D. get internet service route list
Answer: C
NEW QUESTION 88
Why does FortiGate Keep TCP sessions in the session table for several seconds, even after both sides (client and server) have terminated the session?
- A. To remove the NAT operation
- B. To generate logs
- C. To allow for out-of-order packets that could arrive after the FIN/ACK packets
- D. To finish any inspection operations
Answer: D
NEW QUESTION 89
Exhibit:
Refer to the exhibit to view the authentication rule configuration In this scenario, which statement is true?
- A. IP-based authentication is enabled
- B. Policy-based authentication is enabled
- C. Session-based authentication is enabled.
- D. Route-based authentication is enabled
Answer: C
NEW QUESTION 90
Examine the network diagram shown in the exhibit, then answer the following question:
Which one of the following routes is the best candidate route for FGT1 to route traffic from the Workstation to the Web server?
- A. 172.16.32.0/24 is directly connected, port1
- B. 172.16.0.0/16 [50/0] via 10.4.200.2, port2 [5/0]
- C. 10.4.200.0/30 is directly connected, port2
- D. 0.0.0.0/0 [20/0] via 10.4.200.2, port2
Answer: A
NEW QUESTION 91
Refer to the exhibit to view the application control profile.
Based on the configuration, what will happen to Apple FaceTime?
- A. Apple FaceTime will be allowed, based on the Apple filter configuration.
- B. Apple FaceTime will be allowed, based on the Categories configuration.
- C. Apple FaceTime will be blocked, based on the Excessive-Bandwidth filter configuration
- D. Apple FaceTime will be allowed only if the filter in Application and Filter Overrides is set to Learn
Answer: C
NEW QUESTION 92
A network administrator wants to set up redundant IPsec VPN tunnels on FortiGate by using two IPsec VPN tunnels and static routes.
* All traffic must be routed through the primary tunnel when both tunnels are up
* The secondary tunnel must be used only if the primary tunnel goes down
* In addition, FortiGate should be able to detect a dead tunnel to speed up tunnel failover Which two key configuration changes are needed on FortiGate to meet the design requirements? (Choose two,)
- A. Enable Auto-negotiate and Autokey Keep Alive on the phase 2 configuration of both tunnels.
- B. Configure a high distance on the static route for the primary tunnel, and a lower distance on the static route for the secondary tunnel.
- C. Configure a lower distance on the static route for the primary tunnel, and a higher distance on the static route for the secondary tunnel.
- D. Enable Dead Peer Detection.
Answer: C,D
NEW QUESTION 93
Examine the IPS sensor and DoS policy configuration shown in the exhibit, then answer the question below.
When detecting attacks, which anomaly, signature, or filter will FortiGate evaluate first?
- A. Location: server Protocol: SMTP
- B. IMAP.Login.brute.Force
- C. SMTP.Login.Brute.Force
- D. ip_src_session
Answer: B
NEW QUESTION 94
How does FortiGate act when using SSL VPN in web mode?
- A. FortiGate acts as an HTTP reverse proxy.
- B. FortiGate acts as DNS server.
- C. FortiGate acts as router.
- D. FortiGate acts as an FDS server.
Answer: B
Explanation:
Explanation/Reference: https://pub.kb.fortinet.com/ksmcontent/Fortinet-Public/current/Fortigate_v4.0MR3/fortigate-sslvpn-
40-mr3.pdf
NEW QUESTION 95
Which two VDOMs are the default VDOMs created when FortiGate is set up in split VDOM mode? (Choose two.)
- A. Mgmt
- B. FG-traffic
- C. Root
- D. FG-Mgmt
Answer: B,C
Explanation:
Explanation/Reference: https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/758820/split-task-vdom-mode
NEW QUESTION 96
Refer to the exhibit.
According to the certificate values shown in the exhibit, which type of entity was the certificate issued to?
- A. A bridge CA
- B. A root CA
- C. A user
- D. A subordinate
Answer: C
NEW QUESTION 97
Which statement correctly describes NetAPI polling mode for the FSSO collector agent?
- A. NetAPI polling can increase bandwidth usage in large networks.
- B. The collector agent uses a Windows API to query DCs for user logins.
- C. The collector agent must search security event logs.
- D. The NetSessionEnum function is user] to track user logouts.
Answer: A
NEW QUESTION 98
......
Exam Valid Dumps with Instant Download Free Updates: https://www.practicematerial.com/NSE4_FGT-6.4-exam-materials.html
