Most UptoDate Network Appliance NS0-520 Exam Dumps PDF 2022
100% Free NCIE-SAN Specialist NS0-520 Dumps PDF Demo Cert Guide Cover
NetApp NS0-520 Exam Certification Details:
| Exam Code | NS0-520 NCIE SAN Specialist, ONTAP |
| Exam Name | Implementation Engineer SAN Specialist, ONTAP |
| Exam Price | $150 USD |
| Passing Score | 62% |
| Number of Questions | 60 |
| Sample Questions | NetApp NS0-520 Sample Questions |
| Recommended Training | ONTAP SAN Fundamentals (WBT) SAN Administration SAN Implementation (ILT) |
| Exam Registration | PEARSON VUE |
| Duration | 90 minutes |
NetApp NS0-520 Exam Topics:
| Section | Objectives |
|---|---|
| ONTAP SAN implementation testing and troubleshooting | - Demonstrate knowledge of testing tasks - Demonstrate knowledge of troubleshooting tasks |
| ONTAP SAN implementation and configuration | - Demonstrate knowledge of clustered storage system node configuration tasks - Demonstrate knowledge of SVM configuration tasks - Demonstrate knowledge of clustered storage system FCP or NVMe configuration tasks - Demonstrate knowledge of clustered storage system iSCSI configuration tasks - Describe how to configure switches - Describe how to configure host systems - Demonstrate knowledge of storage space utilization or management concepts |
| ONTAP SAN planning | - Identify environmental and physical considerations - Describe storage controller configuration concepts - Describe switch configuration concepts - Describe host configuration concepts - Describe storage space utilization or management concepts |
| ONTAP® SAN solution assessment | - Identify that all prerequisites for the installation of NetApp® system, hosts, and FCP/FCoE switches are verified. - Identify a detailed inventory of SAN components - Describe the solution design and the hardware provisioned to meet customer’s requirements and expectations. |
NEW QUESTION 21
What information should you document about your storage fabrics? (Choose two.)
- A. igroup name
- B. Inter-Switch Links (ISLs)
- C. zoning configuration
- D. name service
Answer: A,D
NEW QUESTION 22
You are connecting an ISL between two Brocade switches on ports 20 and 21.
Which port-channel type should you configure?
- A. E_port
- B. FL_port
- C. U_port
- D. F_port
Answer: A
NEW QUESTION 23
Click the Exhibit button.
A customer is troubleshooting an AFF A700 2-node cluster that is running out of space. They need to add two additional shelves, one shelf to stack-1, and a shelf to stack-2.
Referring to the exhibit, how many cables are required?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 24
Click the Exhibit button.
The storage system reports that one or more of the FC LIFs have the administratively up and operationally down status. Initiators are unable to connect to the affected LIFs or access LUNs that are presented by those LIFs.
Referring to the exhibit, which command fields provide port login details with the switch?
- A. media-type
- B. status-extended
- C. conn-established
- D. fabric-established
Answer: D
NEW QUESTION 25
Click the Exhibit button.
You need to perform an automated non-disruptive upgrade from ONTAP 9.5 to ONTAP 9.7.
Referring to the exhibit, which tool would be used?
- A. OneCollect
- B. AutoSupport OnDemand
- C. Upgrade Advisor
- D. Perfstat
Answer: C
NEW QUESTION 26
You are in the testing phase of a newly deployed NVMe over Fibre Channel (NVMe/FC) SAM environment using Asynchronous Namespace Access (ANA). You are unable to successfully fail over a workload.
In this scenario, which action should you perform?
- A. Verify that multi-initiator zoning is configured on the FC switches.
- B. Verify that the host operating system version supports ANA.
- C. Verify that the NVMe/FC host utilities kit is installed for ANA.
- D. Verify that the DM-Multipath driver is configured for ANA.
Answer: D
NEW QUESTION 27
Click the Exhibit button.
An administrator enabled the FC protocol on an SVM and created a LUN for a Windows Server 2019 server. After a rescan, the LUN is not visible on the host.
Referring to the exhibit, which two steps must the administrator take to solve this problem? (Choose two.)
- A. Create an igroup, add the iSCSI IQN, and then map the igroup to the LUN.
- B. Create an igroup, add the WWPN of the host initiator, and then map the igroup to the LUN.
- C. Disable NPIV on the switch.
- D. Enable NPIV on the switch.
Answer: B,D
NEW QUESTION 28
What is a prerequisite for enabling SCSI UNMAP support for SAN attached hosts?
- A. The space-slo parameter must be set to none.
- B. The space-allocation parameter must be enabled.
- C. The LUN mapping must be deleted.
- D. The space-slo parameter must be set to semi-thick.
Answer: B
NEW QUESTION 29
Which two SAN components are inventoried by Active IQ OneCollect? (Choose two.)
- A. power supply
- B. storage controller
- C. fans
- D. FC switches
Answer: B,D
NEW QUESTION 30
A storage administrator is setting up a Red Hat Enterprise Linux 8.1 system to use NVMe storage in ONTAP 9.7.
In this scenario, which action is required?
- A. Load the Ethernet drivers.
- B. Set up ALUA.
- C. Set up the Red Hat auto mounter.
- D. Load the FC HBA drivers.
Answer: D
NEW QUESTION 31
You are adding a new AFF A220 FIA pair to an existing FlexPod infrastructure that is using a pair of Nexus 9332PX switches. Due to rack space constraints, the AFF A220 is to be installed in an adjoining rack, and the distance from the back of the AFF A220 to the Nexus 9332PX switches is nine meters.
In this scenario, which 10Gbe cabling solution would you use to connect the AFF A220 to the Nexus 9332PX switches?
- A. mini SAS
- B. active Twinax
- C. LC/LC OM4 optical
- D. passive Twinax
Answer: C
NEW QUESTION 32
Click the Exhibit button.
Referring to the exhibit, which WWPN would you add to a zone set to provide access to a LUN hosted in ONTAP?
- A. 20:00:00:00:c9:43:f2:9e
- B. 20:lb:00:a0:98:13:d5:d4
- C. 50:0a:09:81:87:09:3d:96
- D. 10:00:00:00:c9:43:f2:9e
Answer: D
NEW QUESTION 33
A customer has decided to repurpose a NetApp FC target card from an older system. After installing the card into the newer NetApp AFF, the system kernel panics on boot.
Which tool would you use determine the problem?
- A. Interoperability Matrix Tool (IMT)
- B. Hardware Universe (HWU)
- C. OnCommand Insight (OCI)
- D. Active IQ OneCollect
Answer: B
NEW QUESTION 34
You have a new 2-node AFF All SAN Array A700 cluster serving iSCSI LUNs. You are asked to test failures of the front-end protocol connections.
Which two actions satisfy the failure criteria? (Choose two.)
- A. Perform a storage controller failover.
- B. Pull an Ethernet cable from a Linux host.
- C. Disable Snapshot policies.
- D. Pull an Ethernet cable from a storage port with a cluster LIF.
Answer: A,B
NEW QUESTION 35
A database owner requests that two additional hosts be added to an application server cluster. This brings the host count for the fabric to 10. The company's internal procedure is to set SAN hosts with a queue depth of 256. The FAS8300 2-node cluster is configured with one HBA per node with one port connected to fabric A and one port connected to fabric B.
Users complain about inconsistent performance.
What must the storage administrator do to ensure continuous operation of the hosts in this new configuration?
- A. Reduce the queue depth of the hosts such that the total does not exceed 2048.
- B. Reduce the number of LIFs per node on the FAS8300 cluster.
- C. Create two additional LIFs per node on the FAS8300 cluster.
- D. Add two more hosts to the application server cluster.
Answer: A
NEW QUESTION 36
You have a 4-node AFF A400 cluster serving iSCSI and FC LUNs. You are asked to tier Snapshot copy data from the SSDs to both Azure Blob storage and Amazon S3. The two sets of Snapshot copies must be managed by ONTAP software so that they are accessible for cloning and replication.
In this scenario, which NetApp technology accomplishes this task?
- A. Fabric Pool
- B. Flash Pool
- C. MetroCluster
- D. Cloud Sync
Answer: A
NEW QUESTION 37
Click the Exhibit button.
Referring to the exhibit, which switch in the fabric is the principal switch?
- A. sw4
- B. sw10
- C. sw5
- D. sw6
Answer: D
NEW QUESTION 38
......
Updated Network Appliance NS0-520 Dumps – PDF & Online Engine: https://www.practicematerial.com/NS0-520-exam-materials.html
