[Nov 06, 2021] Updates Up to 365 days On Valid E20-393 Braindumps
Best QualityE20-393 Exam Questions EMC Test To Gain Brilliante Result
NEW QUESTION 24
How is a Local LUN Move configured?
- A. First select the Pool to move the LUN into, then choose the Move operation, and finally select a LUN.
- B. First select the LUN, then select the Pool to move the LUN into, and finally choose the Move operation.
- C. First select a LUN, then choose the Move operation, and finally select the Pool to move the LUN into
- D. First choose the Move operation, then select a LUN, and finally select the Pool to move the LUN into.
Answer: C
Explanation:
Explanation
References:
https://www.dellemc.com/sr-me/documentation/unity-family/unity-p-config-luns/02-configuring-lun-move.htm
NEW QUESTION 25
A service provider is installing a Unity storage system for an end-user. The end-user is concerned about
network security and will not allow the service provider access to the network.
How can the service provider set a static IP address for the Unity storage system management interface?
- A. Connect directly to the service ports and configure the networking through UEMCLI
- B. Use an IPMI serial over LAN connection
- C. Use the embedded InitCLI tool
- D. Use the Connection Utility to create a configuration file
Answer: A
Explanation:
Explanation
The svc_initial_config UEMCLI command sets up initial system configuration. It configures a management IP
address when the Connection Utility (CU) is not available on the network. If an address is set, this command
can also change the management IPv4 and IPv6 configuration mode. It attempts to configure the system with
the given friendly name and/or network parameters.
Note: The Unisphere CLI (UEMCLI) is a tool that provides us with the CLI access to perform the same
actions as one would on the Unisphere web interface.
References: https://www.emc.com/collateral/TechnicalDocument/docu69328.pdf
(page 60)
NEW QUESTION 26
What is one method that is used to verify an ESRS configuration?
- A. Send an e-mail verification
- B. RSA authentication
- C. Trigger an SNMP trap test
- D. Proxy server authentication
Answer: B
Explanation:
Explanation
References: https://www.emc.com/collateral/software/data-sheet/h1948-secure-remote-supp-gateway-ds.pdf
NEW QUESTION 27
A storage administrator attempts to restart the Management Server to resolve Unisphere issues, but is unable to do so. What is a possible reason for this issue?
- A. SP is in Reset and Hold mode
- B. SP is in Maintenance mode
- C. Both SPs are in Service mode
- D. Only one SP is in Service mode
Answer: A
Explanation:
Explanation
NEW QUESTION 28
Which feature provides the ability to provision block and file storage for Microsoft Windows or Microsoft SharePoint sites?
- A. EMS Storage Integrator for Windows
- B. vStorage APIs for Array Integration
- C. EMC Virtual Storage Integrator
- D. Array Offloaded Data Transfer
Answer: A
NEW QUESTION 29
A system administrator has installed the Unity Connection Utility on a Microsoft Windows host. The Windows host is connected to the same physical subnet as a newly installed Unity storage system. When the utility is run, it does not discover any Unity storage systems.
What should be checked on the host that may be preventing the utility from discovering any Unity storage systems?
- A. Host firewall services
- B. Network Access Filter Driver
- C. Ethernet adapter flow control
- D. Java SE version
Answer: D
Explanation:
Explanation/Reference:
Unity Connection is dependent on Java for some of the components to work.
Incorrect Answers:
B: Ethernet flow control is a mechanism for temporarily stopping the transmission of data on Ethernet family computer networks.
D: As the traffic is within the same physical subnet a firewall would have no effect.
References: https://www.cisco.com/c/en/us/support/docs/unified-communications/unity- connection/117497-probsol-unity-00.html
NEW QUESTION 30
What is a consideration when designing a replication solution using the native Dell EMC Unity replication
feature?
- A. Asynchronous remote replication supports replication to up to one remote Dell EMC Unity systems
- B. Asynchronous remote replication supports replication to up to two remote Dell EMC Unity systems
- C. Synchronous remote replication supports replication to up to two remote Dell EMC Unity systems
- D. Synchronous remote replication supports replication to up to one remote Dell EMC Unity systems
Answer: B
NEW QUESTION 31
In order to replace a faulty component, a service provider has placed one of the Unity Storage Processors into
Service mode. Once the component is replaced, how is the Storage Processor brought back into Normal mode?
- A. Restart the Management software
- B. Reboot the storage system
- C. Reboot the Storage Processor
- D. Exit the Service Mode task
Answer: C
Explanation:
Explanation
If a single Storage Processor (SP) comes up in Service Mode, in Unisphere, you need to reboot the SP to
return it to Normal Mode.
References: https://www.emc.com/collateral/TechnicalDocument/docu69355.pdf
(page 4)
NEW QUESTION 32
How is encryption set for a Unity storage system?
- A. First time the license is applied
- B. Clicking the "Mode" checkbox on the Manage Encryption page
- C. Selecting "Status' on the Manage Encryption page
- D. Automatically set at the factory
Answer: A
NEW QUESTION 33
A Unity system LUN has a daily snapshot schedule with a Retention Policy of seven days. A hardware failure results in a double fault of the LUN.
Which snapshot behavior will be experienced?
- A. All of the snapshots will be unavailable to restore data from
- B. Data restoration is available from the newest snapshot, all others are unavailable
- C. Data restoration is available from the oldest snapshot, all others are unavailable
- D. All of the snapshots will be available to restore data from
Answer: B
Explanation:
The oldest snapshots residing on that pool with retention policy set to pool automatic deletion begin being deleted.
NEW QUESTION 34
Match each Dell EMC tool to its respective function.
Answer:
Explanation:
NEW QUESTION 35
After performing the initial configuration of a new UnityVSA, when do alerts concerning license expiration
first occur?
- A. 7 days prior to expiration
- B. 2 months prior to expiration
- C. 15 days prior to expiration
- D. 1 month prior to expiration
Answer: D
Explanation:
Explanation
References: https://www.emc.com/collateral/white-papers/h15092-dell-emc-unity-vsa.pdf
NEW QUESTION 36
What is used by the Local LUN Move data mobility feature?
- A. Common base Snapshots
- B. Transparent Data Transfer
- C. Inband Migration Tool
- D. SANCopy push
Answer: B
Explanation:
References:
https://www.emc.com/collateral/white-papers/h15163-dell-emc-unity-migration-technologies.pdf (p.8)
NEW QUESTION 37
Which Unity storage resource is configured when running the Initial Configuration wizard?
- A. Consistency Group
- B. Storage Pool
- C. LUN
- D. File System
Answer: D
NEW QUESTION 38
When the LUN Snapshot Attach to Host operation is performed, what does theUnity system optionally do before beginning the attach process?
- A. Creates a copy of the snapshot
- B. Deletes all other existing snapshots of the LUN
- C. Creates a snapshot of the LUN
- D. Detaches the host from the snapshots of any other LUN
Answer: A
NEW QUESTION 39
Which system level alert indicates an error has occurred that has no impact on the system and should be remedied in the near future?
- A. Error
- B. Informational
- C. Warning
- D. Notice
Answer: A
Explanation:
References:
https://www.emc.com/collateral/white-papers/h15085-dell-emc-unity-unisphere-overview.pdf (23)
NEW QUESTION 40
......
Focus on E20-393 All-in-One Exam Guide For Quick Preparation: https://www.practicematerial.com/E20-393-exam-materials.html
