[Nov-2023] Pass Network Appliance NS0-183 Exam in First Attempt Guaranteed!
Full NS0-183 Practice Test and 61 unique questions with explanations waiting just for you, get it now!
NEW QUESTION # 28
Click the Exhibit button.
You are adding new DS224C shelves in a new stack to your cluster with FAS8060 controllers running ONTAP 9.7.
Referring to the exhibit, which two actions should be performed to the cluster before installing the new shelves? (Choose two.)
- A. Remove the Ethernet cables.
- B. Enable in-band ACP.
- C. Disable out-of-band ACP.
- D. Move the SAS cables to a new stack.
Answer: C,D
Explanation:
Explanation/Reference:
NEW QUESTION # 29
You just installed two nodes into an existing ONTAP cluster.
When running date on the CLI you notice that the cluster1-03 node is running behind time. You confirmed that you can reach the node management LIF of each node.
Referring to the exhibit, which statement is true?
- A. The NTP is adjusting in small increments.
- B. The DNS is not configured for this node.
- C. No NTP server is configured for this node.
- D. The node-management LIF has to be on e0M for NTP to work.
Answer: B
NEW QUESTION # 30
What is the maximum number of data disks that a RAID-TEC RAID group has?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 31
According to NetApp best practices, how many NTP servers should you associate with an ONTAP cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 32
Your customer wants a newly installed AFF C190 cluster to send SNMP notifications to a trap host called OVERWATCH01.
In this scenario, which two statements are correct? (Choose two.)
- A. Configure an SNMP community string on the cluster.
- B. Configure DNS on the cluster.
- C. Configure a trap host on the cluster.
- D. Configure a firewall policy and allow SNMP.
Answer: B,C
NEW QUESTION # 33
What are two ONTAP storage efficiency technologies that would be used on an AFF A400 cluster? (Choose two.)
- A. FlexClone volumes
- B. thin provisioning
- C. Flash Pool
- D. FlashCache
Answer: C,D
NEW QUESTION # 34
After you install a new cluster with ONTAP 9.5 software, you want to create a new broadcast domain. During the creation of the broadcast domain, you receive an error that there are no free ports available.
What is the reason for this error message?
- A. By Default, all ports are bound to the "Default" broadcast domain. To create a new port, remove the needed ports from the "Default" broadcast domain.
- B. By Default, all ports are bound to the "Default" broadcast domain. To create a new port, remove the needed ports from the "Default" broadcast domain and create a new IPspace.
- C. You can create a new broadcast domain only within the CLI.
- D. Before you configure a new broadcast domain, you should create a new IPspace.
Answer: A
NEW QUESTION # 35
You completed the installation of an AFF A700s with NetApp CN1610 switches. You used ports e0a and e0f with breakout cables to connect the controllers to the interconnect switches. After completing the cluster setup, ports e0e and e0i are not visible in OnCommand System Manager. In this scenario, what caused this problem?
- A. You are missing a license to enable those ports.
- B. You must first enable the ports using the network port modifycommand.
- C. This is a hardware error and you must open a case with NetApp Support.
- D. Breakout cables were used and the second port on the same ASIC became disabled.
Answer: B
NEW QUESTION # 36
You are completing an ONTAP base installation, and your customer is asking you to create two SVMs, one for NFS and one for SMB.
Which type of SVM needs to be created to complete the installation?
- A. data SVM
- B. system SVM
- C. multitenancy node SVM
- D. admin SVM
Answer: A
NEW QUESTION # 37
You have an AFF A400 cluster that is running ONTAP 9.7 software. You are asked to set up FlexCache for NFS volumes.
In this scenario, which statement is correct when implementing FlexCache?
- A. A subscription license is required.
- B. No license is required.
- C. A site license is required.
- D. A capacity license is required.
Answer: D
NEW QUESTION # 38
Click the Exhibit button.
As shown in the exhibit, you have an 8-node ONTAP 9.7 cluster. You are asked to set up a SnapMirror volume relationship between node-1 and node-8 in the same cluster.
In this scenario, which two network components are used by the SnapMirror volume? (Choose two.)
- A. private network
- B. cluster LIFs
- C. client network
- D. management LIFs
Answer: A,B
NEW QUESTION # 39
You installed a new AFF A800 2-node ONTAP 9.5 cluster and are asked to run diagnostics to validate the hardware.
Which command is used from the loader prompt to enter diagnostics?
- A. boot_diags
- B. sldiag
- C. savenv
- D. printenv
Answer: A
NEW QUESTION # 40
Click the Exhibit button.
You have an 8-node cluster, and sometimes the data LIFs fail over to a non-working port.
Referring to the exhibit, what must you do to solve this problem?
- A. Configure the LIFs using separate home nodes.
- B. Configure more than one IPspace.
- C. Configure the MTU consistently across the cluster.
- D. Configure the correct Ethernet ports in all broadcast domains.
Answer: C
NEW QUESTION # 41
While testing a recently installed FAS8700 cluster, a node fails. You now need to replace the impaired node.
In this scenario, which two statements are true? (Choose two.)
- A. You must move the boot device from the impaired node to the replacement node.
- B. The boot device must remain intact and must not be removed from the impaired node.
- C. A controller model of the same type must be used to replace the impaired node.
- D. You can change any drives or disk shelves as part of this replacement procedure.
Answer: A,C
NEW QUESTION # 42
You are planning to install a new ONTAP 9.7 All SAN Array (ASA) into your existing data center.
In this scenario, which cluster configuration is allowed with ASA controllers?
- A. ASA controllers can only be installed as a standalone HA pair.
- B. Add the ASA controllers to an existing 4-node cluster with NAS licenses.
- C. ASA controllers can only be added to clusters that have existing SAN licenses.
- D. Add the ASA controllers to an existing 10-node cluster.
Answer: A
Explanation:
https://docs.netapp.com/allsan/index.jsp?topic=%2Fcom.netapp.doc.dot-asa-config%2FGUID-C0C9B6EF-1AA7-429E-BB84-AC5F9E16D088.html
NEW QUESTION # 43
Your customer wants a newly installed AFF C190 cluster to send SNMP notifications to a trap host called OVERWATCH01.
In this scenario, which two statements are correct? (Choose two.)
- A. Configure an SNMP community string on the cluster.
- B. Configure DNS on the cluster.
- C. Configure a trap host on the cluster.
- D. Configure a firewall policy and allow SNMP.
Answer: B,C
Explanation:
https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Software/ONTAP_OS/How_to_configure_SNMP_monitoring_on_DATA_ONTAP
NEW QUESTION # 44
You have installed and configured a new AFF C190 cluster with ONTAP 9.7. Your customer wants you to install the latest version of ONTAP.
In this scenario, what are two methods to update ONTAP? (Choose two.)
- A. Use ONTAP System Manager to upload and install the new software image.
- B. Use ONTAP System Manager to download and install the new software image.
- C. Use a USB drive with the new software image and let ONTAP automatically boot.
- D. Use the cluster image package get and cluster image update commands.
Answer: B,D
NEW QUESTION # 45
You use the system health subsystem show command to troubleshoot your newly installed ONTAP cluster.
In this scenario, which two health outputs would this command show you? (Choose two.)
- A. data switch cabling
- B. cluster switch cabling
- C. shelf connectivity
- D. node CPU utilization
Answer: B,C
NEW QUESTION # 46
You are installing a new AFF A400 cluster that is running ONTAP 9.7 software. You are asked to attach an Amazon S3 cloud tier for FabricPool technology.
In this scenario, which two NetApp License File (NLF) types are supported for cloud tiering? (Choose two.)
- A. base
- B. term-based
- C. perpetual
- D. master
Answer: B,C
Explanation:
Explanation/Reference: https://www.netapp.com/pdf.html?item=/media/17239-tr4598pdf.pdf (10)
NEW QUESTION # 47
Click the Exhibit button.
A customer has a 2-node FAS8200 cluster with four DS212C shelves with 10 TB SATA drives.
Referring to the exhibit, an aggregate will be created with which default RAID type?
- A. RAID1
- B. RAID4
- C. RAID_TEC
- D. RAID_DP
Answer: C
NEW QUESTION # 48
You are installing a new ONTAP 9.7 cluster and attaching the cluster to two separate networks. Your customer has indicated that the same range of client IP addresses are used on both networks and that the networks are never allowed to communicate with each other.
In this scenario, which ONTAP feature must be configured to securely allow all clients to access ONTAP NAS protocols?
- A. BGP
- B. IPspaces
- C. routing
- D. broadcast domains
Answer: D
Explanation:
Explanation/Reference: https://www.netapp.com/media/16885-tr-4182.pdf (9)
NEW QUESTION # 49
Before installing an 8-node cluster for a customer, you want to validate compatibility with existing hardware.
Which two tools would you use to validate the configuration? (Choose two.)
- A. Active IQ Config Advisor
- B. Interoperability Matrix Tool
- C. Active IQ System Manager
- D. Hardware Universe
Answer: B,D
NEW QUESTION # 50
You are installing a new ONTAP 9.7 cluster and attaching the cluster to two separate networks. Your customer has indicated that the same range of client IP addresses are used on both networks and that the networks are never allowed to communicate with each other.
In this scenario, which ONTAP feature must be configured to securely allow all clients to access ONTAP NAS protocols?
- A. BGP
- B. IPspaces
- C. broadcast domains
- D. routing
Answer: B
Explanation:
https://www.netapp.com/media/16885-tr-4182.pdf 9.3 Multiple IPspaces with Overlapping IP Addresses
NEW QUESTION # 51
Your customer wants to buy four new DS212C shelves with an 8 TB SATA drive. The customer also wants to know the usable aggregate size of this configuration.
In this scenario, which resource would you use to accomplish this task?
- A. Config Advisor
- B. Fusion
- C. Hardware Universe (HWU)
- D. Interoperability Matrix Tool (IMT)
Answer: B
NEW QUESTION # 52
You need to install a cluster with a FAS2720 HA pair and a FAS8300 HA pair.
Which NetApp tool will verify which cluster interconnect switches support this configuration?
- A. Active IQ Config Advisor
- B. Hardware Universe (HWU)
- C. mysupport.netapp.com site
- D. Interoperability Matrix Tool (IMT)
Answer: B
NEW QUESTION # 53
......
Get Latest NS0-183 Dumps Exam Questions in here: https://www.practicematerial.com/NS0-183-exam-materials.html
