NSE7_SDW-7.0 Practice Test Questions Updated 70 Questions
Fortinet NSE7_SDW-7.0 Dumps - Secret To Pass in First Attempt
Fortinet NSE7_SDW-7.0 exam is designed to test the knowledge and skills of network security professionals in the domain of Software-Defined Wide Area Networking (SD-WAN). As more and more organizations move towards implementing SD-WAN solutions, there is an increasing need for security experts who can help protect the network against potential cyber threats. The NSE7_SDW-7.0 exam is one of the most recognized and respected certifications in the industry and provides a comprehensive assessment of a candidate's knowledge of the latest SD-WAN security technologies and best practices.
NEW QUESTION # 28
Which are three key routing principles in SD-WAN? (Choose three.)
- A. By default, SD-WAN rules are skipped if the best route to the destination is not an SD-WAN member.
- B. SD-WAN rules have precedence over ISDB routes.
- C. Regular policy routes have precedence over SD-WAN rules.
- D. By default, SD-WAN members are skipped if they do not have a valid route to the destination.
- E. FortiGate performs route lookups for new sessions only.
Answer: A,C,D
NEW QUESTION # 29
Which two statements about SD-WAN central management are true? (Choose two.)
- A. It supports normalized interfaces for SD-WAN member configuration.
- B. It does not support meta fields.
- C. It uses templates to configure SD-WAN on managed devices.
- D. The objects are saved in the ADOM common object database.
Answer: C,D
Explanation:
Explanation
Normalized interfaces are not supported for SD-WAN templates. You can create multiple SD-WAN zones and add interface members to the SD-WAN zones. You must bind the interface members by name to physical interfaces or VPN interfaces.https://docs.fortinet.com/document/fortigate/7.0.0/sd-wan-new-features/794804/new-sd-wan-template-
NEW QUESTION # 30
What are two benefits of using forward error correction (FEC) in IPsec VPNs? (Choose two.)
- A. FEC supports hardware offloading.
- B. FEC can leverage multiple IPsec tunnels for parity packets transmission.
- C. FEC transmits parity packets that can be used to reconstruct packet loss.
- D. FEC improves reliability of noisy links.
Answer: C,D
NEW QUESTION # 31 
Exhibit B -
Exhibit A shows the system interface with the static routes and exhibit B shows the firewall policies on the managed FortiGate.
Based on the FortiGate configuration shown in the exhibits, what issue might you encounter when creating an SD-WAN zone for port1 and port2?
- A. port2 is referenced in a static route.
- B. port1 and port2 are not administratively down.
- C. port1 is referenced in a firewall policy.
- D. port1 is assigned a manual IP address.
Answer: C
NEW QUESTION # 32
Refer to the exhibit.
Based on the exhibit, which action does FortiGate take?
- A. FortiGate bounces port5 after it detects all SD-WAN members as dead.
- B. FortiGate fails over to the secondary device after it detects all SD-WAN members as dead.
- C. FortiGate brings up port5 after it detects all SD-WAN members as alive.
- D. FortiGate brings down port5 after it detects all SD-WAN members as dead.
Answer: B
NEW QUESTION # 33
Refer to the exhibit.
The exhibit shows the SD-WAN rule status and configuration.
Based on the exhibit, which change in the measured latency will make T_MPLS_0 the new preferred member?
- A. When T_MPLS_0 has a latency of 100 ms.
- B. When T_INET_0_0 and T_MPLS_0 have the same latency.
- C. When T_INET_0_0 has a latency of 250 ms.
- D. When T_N1PLS_0 has a latency of 80 ms.
Answer: D
NEW QUESTION # 34
In a hub-and-spoke topology, what are two advantages of enabling ADVPN on the IPsec overlays? (Choose two.)
- A. It provides direct connectivity between spokes by creating shortcuts.
- B. It enables spokes to establish shortcuts to third-party gateways.
- C. It enables spokes to bypass the hub during shortcut negotiation.
- D. It provides the benefits of a full-mesh topology in a hub-and-spoke network.
Answer: A,D
NEW QUESTION # 35
Which best describes the SD-WAN traffic shaping mode that bases itself on a percentage of available bandwidth?
- A. Interface-based shaping mode
- B. Shared-policy shaping mode
- C. Reverse-policy shaping mode
- D. Per-IP shaping mode
Answer: A
Explanation:
Explanation
Interface-based shaping goes further, enabling traffic controls based on percentage of the interface bandwidth.
NEW QUESTION # 36
Which best describes the SD-WAN traffic shaping mode that bases itself on a percentage of available bandwidth?
- A. Interface-based shaping mode
- B. Shared-policy shaping mode
- C. Reverse-policy shaping mode
- D. Per-IP shaping mode
Answer: A
Explanation:
Interface-based shaping goes further, enabling traffic controls based on percentage of the interface bandwidth.
NEW QUESTION # 37
Refer to the exhibit.
Based on the output shown in the exhibit, which two criteria on the SD-WAN member configuration can be used to select an outgoing interface in an SD-WAN rule? (Choose two.)
- A. Set load-balance-mode source-ip-ip-based.
- B. Set priority 10.
- C. Set source 100.64.1.1.
- D. Set cost 15.
Answer: B,D
NEW QUESTION # 38
Which two statements describe how IPsec phase 1 main mode is different from aggressive mode when performing IKE negotiation? (Choose two )
- A. A total of six packets are exchanged between an initiator and a responder instead of three packets.
- B. XAuth is enabled as an additional level of authentication, which requires a username and password.
- C. The use of Diffie Hellman keys is limited by the responder and needs initiator acceptance.
- D. A peer ID is included in the first packet from the initiator, along with suggested security policies.
Answer: A,B
NEW QUESTION # 39
In the default SD-WAN minimum configuration, which two statements are correct when traffic matches the default implicit SD-WAN rule? (Choose two )
- A. Traffic has matched none of the FortiGate policy routes.
- B. Matched traffic failed RPF and was caught by the rule.
- C. An absolute SD-WAN rule was defined and matched traffic.
- D. The FIB lookup resolved interface was the SD-WAN interface.
Answer: A,D
NEW QUESTION # 40 
Which two conclusions for traffic that matches the traffic shaper are true? (Choose two.)
- A. The traffic shaper drops packets if the bandwidth is less than 2500 KBps.
- B. The traffic shaper drops packets if the bandwidth exceeds 6250 KBps.
- C. The traffic shaper limits the bandwidth of each source IP to a maximum of 6250 KBps.
- D. The measured bandwidth is less than 100 KBps.
Answer: B,D
NEW QUESTION # 41
Refer to the exhibits.
Which two conclusions for traffic that matches the traffic shaper are true? (Choose two.)
- A. The traffic shaper drops packets if the bandwidth is less than 2500 KBps.
- B. The traffic shaper drops packets if the bandwidth exceeds 6250 KBps.
- C. The traffic shaper limits the bandwidth of each source IP to a maximum of 6250 KBps.
- D. The measured bandwidth is less than 100 KBps.
Answer: B,D
NEW QUESTION # 42
Refer to the exhibit.
In a dual-hub hub-and-spoke SD-WAN deployment, which is a benefit of disabling the anti-replay setting on the hubs?
- A. It instructs the hub to disable the reordering of TCP packets on behalf of the receiver, to improve performance.
- B. It instructs the hub to skip content inspection on TCP traffic, to improve performance.
- C. It instructs the hub to not check the ESP sequence numbers on IPsec traffic, to improve performance.
- D. It instructs the hub to disable TCP sequence number check, which is required for TCP sessions originated from spokes to fail over back and forth between the hubs.
Answer: D
NEW QUESTION # 43
Refer to the exhibit.
The exhibit shows the BGP configuration on the hub in a hub-and-spoke topology. The administrator wants BGP to advertise prefixes from spokes to other spokes over the IPsec overlays, including additional paths. However, when looking at the spoke routing table, the administrator does not see the prefixes from other spokes and the additional paths.
Based on the exhibit, which three settings must the administrator configure inside each BGP neighbor group so spokes can learn other spokes prefixes and their additional paths? (Choose three.)
- A. Set additional-path to send
- B. Enable soft-reconfiguration
- C. Enable route-reflector-client
- D. Set advertisement-interval to the number of additional paths to advertise
- E. Set adv-additional-path to the number of additional paths to advertise
Answer: A,C,E
NEW QUESTION # 44
Refer to the exhibit.
An administrator is troubleshooting SD-WAN on FortiGate. A device behind branch1_fgt generates traffic to the 10.0.0.0/8 network. The administrator expects the traffic to match SD-WAN rule ID 1 and be routed over T_INET_0_0. However, the traffic is routed over T_INET_1_0.
Based on the output shown in the exhibit, which two reasons can cause the observed behavior? (Choose two.)
- A. T_INET_0_0 does not have a valid route to the destination.
- B. T_INET_1_0 has a lower route priority value (higher priority) than T_INET_0_0.
- C. The traffic matches a regular policy route configured with T_INET_1_0 as the outgoing device.
- D. T_INET_1_0 has a higher member configuration priority than T_INET_0_0.
Answer: A,C
Explanation:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Assigning-Priority-to-SD-WAN-Members-for-Default/ta-p/230911
NEW QUESTION # 45
Refer to the exhibit.
The device exchanges routes using IBGP.
Which two statements are correct about the IBGP configuration and routing information on the device? (Choose two.)
- A. Each BGP route is three hops away from the destination.
- B. You can run the get router info routing-table database command to display the additional paths.
- C. additional-path is enabled.
- D. ibgp-multipath is disabled.
Answer: B,C
NEW QUESTION # 46
......
Fortinet NSE7_SDW-7.0 Exam Dumps [2023] Practice Valid Exam Dumps Question: https://www.practicematerial.com/NSE7_SDW-7.0-exam-materials.html
NSE7_SDW-7.0 Dumps - Grab Out For [NEW-2023] Fortinet Exam: https://drive.google.com/open?id=1E51vI4djwjVWVYMpALjgN9WFzaRo5epk
