[Oct 22, 2021] SPLK-1003 Practice Exam Dumps - 99% Marks In Splunk Exam [Q19-Q38]

[Oct 22, 2021] SPLK-1003 Practice Exam Dumps - 99% Marks In Splunk Exam

Updated Verified SPLK-1003 Q&As - Pass Guarantee or Full Refund

Exam Topics for Splunk Enterprise Certified Admin

The following will be discussed in SPLUNK SPLK-1003 exam dumps:

• Getting data in
• Splunk configuration files
• License management
• Splunk apps
• Customize the input parsing process
• Distributed search
• Deploy forwarders with Forwarder Management
• Users, roles, and authentication
• Splunk deployment overview
• Configure common Splunk data inputs
• Introduction to Splunk clusters

 

NEW QUESTION 19
Which optional configuration setting in inputs .conf allows you to selectively forward the data to specific indexer(s)?

• A. _INDEXER ROUTING
• B. _INDEXER_LIST
• C. _TCP_ROUTING
• D. _INDEXER_GROUP

Answer: D

 

NEW QUESTION 20
What type of data is counted against the Enterprise license at a fixed 150 bytes per event?

• A. Internal Splunk data
• B. Internal Windows logs
• C. License data
• D. Metricsdata

Answer: D

 

NEW QUESTION 21
An organization wants to collect Windows performance data from a set of clients, however, installing Splunk software on these clients is not allowed. What option is available to collect this data in Splunk Enterprise?

• A. Use Local Windows network monitoring.
• B. Use an index with an Index Data Type of Metrics.
• C. Use Local Windows host monitoring.
• D. Use Windows Remote Inputs with WMI.

Answer: B

 

NEW QUESTION 22
After configuring a universal forwarder to communicate with an indexer, which index can be checked via the Splunk Web UI for a successful connection?

• A. index=test
• B. index=main
• C. index=summary
• D. index=_internal

Answer: D

 

NEW QUESTION 23
How do you remove missing forwarders from the Monitoring Console?

• A. By reloading the deployment server.
• B. By rescanning active forwarders.
• C. By rebuilding the forwarder asset table.
• D. By restarting Splunk.

Answer: C

 

NEW QUESTION 24
Which Splunk indexer operating system platform is supported when sending logs from a Windows universal forwarder?

• A. None of the above.
• B. Windows platform only.
• C. Any OS platform
• D. Linux platform only

Answer: C

 

NEW QUESTION 25
How do you remove missing forwarders from the Monitoring Console?

• A. By reloading the deployment server.
• B. By rescanning active forwarders.
• C. By rebuilding the forwarder asset table.
• D. By restarting Splunk.

Answer: C

Explanation:
Explanation/Reference: https://answers.splunk.com/answers/447096/how-to-remove-missing-forwarders-from-the- distribu.html

 

NEW QUESTION 26
Which of the following configuration files are used with a universal forwarder? (Choose all that apply.)

• A. inputs.conf
• B. forwarder.conf
• C. outputs.conf
• D. monitor.conf

Answer: A,C

Explanation:
Reference:
Configuretheuniversalforwarder

 

NEW QUESTION 27
Which Splunk component does a search head primarily communicate with?

• A. Deployment server
• B. Forwarder
• C. Cluster master
• D. Indexer

Answer: D

 

NEW QUESTION 28
Which Splunk component performs indexing and responds to search requests from the search head?

• A. License master
• B. Search peer
• C. Forwarder
• D. Search head cluster

Answer: B

 

NEW QUESTION 29
Where should apps be located on the deployment server that the clients pull from?

• A. $SPLUNK_HCME/etc/sear:ch
• B. $SFLUNK_KOME/etc/apps
• C. $SPLUNK HCME/etc/deployment-apps
• D. $SPLUNK_HCME/etc/master-apps

Answer: C

 

NEW QUESTION 30
When configuring monitor inputs with whitelists or blacklists, what is the supported method of filtering the lists?

• A. Regular expression
• B. Slash notation
• C. Wildcard-only expression
• D. Irregular expression

Answer: C

 

NEW QUESTION 31
You update a props.conffile while Splunk is running. You do not restart Splunk and you run this command:
splunk btool props list --debug. What will the output be?

• A. A list of all the configurations on-disk that Splunk contains.
• B. A list of the current running props.confconfigurations along with a file path from which the configuration was made.
• C. A verbose list of all configurations as they were when splunkd started.
• D. A list of props.confconfigurations as they are on-disk along with a file path from which the configuration is located.

Answer: B

Explanation:
Explanation/Reference: https://answers.splunk.com/answers/494219/need-help-with-what-should-be-a-simple- precedence.html

 

NEW QUESTION 32
Which authentication methods are natively supported within Splunk Enterprise? (select all that apply)

• A. RADIUS
• B. SAML
• C. LDAP
• D. Duo Multifactor Authentication

Answer: A,D

 

NEW QUESTION 33
Which is a valid stanza for a network input?
[udp://172.16.10.1:9997]

• A. connection_host = web
  sourcetype = web
  [tcp://172.16.10.1:10001]
• B. connection_host = ip
  sourcetype = web
  [tcp://172.16.10.1:9997]
• C. connection_host = dns
  sourcetype = dns
• D. connection = dns
  sourcetype = dns
  [any://172.16.10.1:10001]

Answer: A

Explanation:
Explanation/Reference: https://docs.splunk.com/Documentation/SplunkCloud/8.0.2006/Data/ Bypassautomaticsourcetypeassignment

 

NEW QUESTION 34
Which of the following configuration files are used with a universal forwarder? (Choose all that apply.)

• A. inputs.conf
• B. forwarder.conf
• C. outputs.conf
• D. monitor.conf

Answer: A,C

Explanation:
Explanation/Reference: https://docs.splunk.com/Documentation/Forwarder/8.0.5/Forwarder/Configuretheuniversalforwarder

 

NEW QUESTION 35
Which of the following are available input methods when adding a file input in Splunk Web? (Choose all that apply.)

• A. Index once.
• B. Continuously monitor.
• C. On-demand monitor.
• D. Monitor interval.

Answer: B

 

NEW QUESTION 36
How would you configure your distsearch conf to allow you to run the search below?
sourcetype=access_combined status=200 action=purchase splunk_setver_group=HOUSTON A)

B)

C)

D)

• A. Option C
• B. option A
• C. Option B
• D. Option D

Answer: D

 

NEW QUESTION 37
What is the difference between the two wildcards ... and - for the monitor stanza in inputs, conf?

• A. ... is not supported in monitor stanzas
• B. There is no difference, they are interchangable and match anything beyond directory boundaries.
• C. ... matches anything in that specific directory path segment, whereas - recurses through subdirectories as well.
• D. * matches anything in that specific directory path segment, whereas ... recurses through subdirectories as well.

Answer: C

 

NEW QUESTION 38
......

Splunk SPLK-1003 Exam Syllabus Topics:

Topic	Details
Topic 1	Mask or Delete Raw Data as it is being Indexed Override Sourcetype or Host Based Upon Event Values Route Events to Specific Indexes Based on Event Content
Topic 2	Splunk Admin Basics Identify Splunk Componen License Management Identify License Types Understand License Violations
Topic 3	Splunk Authentication Management Integrate Splunk with LDAP List Other User Authentication Options Describe the Steps to Enable Multifactor Authentication in Splunk
Topic 4	Describe How Distributed Search Works Explain the Roles of the Search Head and Search Peers Configure a Distributed Search Group List Search Head Scaling Options
Topic 5	List the Three Phases of the Splunk Indexing Process List Splunk Input Options|
Topic 6	Identify Additional Forwarder Options Explain the Use of Deployment Management Describe Splunk Deployment Server Manage Forwarders Using Deployment Apps
Topic 7	Use btool to Examine Configuration Settings Splunk Indexes Describe Index Structure List Types of Index Buckets Check Index Data Integrity Describe Indexes.conf Options
Topic 8	Describe the Fishbucket Apply a Data Retention Policy Splunk User Management Describe User Roles in Splunk Create a Custom Role Add Splunk Users
Topic 9	Splunk Configuration Files Describe Splunk Configuration Directory Structure Understand Configuration Layering Understand Configuration Precedence
Topic 10	Describe the Basic Settings for an Input List Splunk Forwarder Types Configure the Forwarder Add an Input to UF Using CLI
Topic 11	Deploy a Remote Monitor Input Network and Scripted Inputs Create Network (TCP and UDP) Inputs Identify Windows Input Types and Uses Create a Basic Scripted Input
Topic 12	Manipulating Raw Data Use Data Preview to Validate Event Creation During the Parsing Phase Explain How Data Transformations are Defined and Invoked
Topic 13	Parsing Phase and Data Understand the Default Processing that Occurs During Parsing Optimize and Configure Event Line Breaking Explain How Timestamps and Time Zones are Extracted or Assigned to Events
Topic 14	Configure Deployment Clients Create File and Directory Monitor Inputs Use Optional Settings for Monitor Inputs Describe Optional Settings for Network Inputs
Topic 15	Describe HTTP Event Collector Understand the Default Processing that Occurs During Input Phase Configure Input Phase Options, Such as Sourcetype Fine-Tuning and Character Set Encoding

 

SPLK-1003 Real Valid Brain Dumps With 121 Questions: https://www.practicematerial.com/SPLK-1003-exam-materials.html

SPLK-1003  Certification with Actual Questions: https://drive.google.com/open?id=1kWn2Mq1cJVHBhEHORpSBReoOcT2SNClO