Use Real 1Y0-440 - 100% Cover Real Exam Questions [Oct-2021]
Dumps Brief Outline Of The 1Y0-440 Exam - PracticeMaterial
NEW QUESTION 23
Scenario: A Citrix Architect has deployed Authentication for the SharePoint server through NetScaler. In order to ensure that users are able to edit or upload documents, the architect has configured persistent cookies on the NetScaler profile.
Which action should the architect take to ensure that cookies are shared between the browser and non-browser applications?
- A. The SharePoint load-balancing VIP FQDN and the AAA VIP FQDN should be in the trusted site of the client browser.
- B. The Secure flag must be enabled on the cookie.
- C. The time zone should be the same on the NetScaler, client, and SharePoint server.
- D. The cookie type should be HttpOnly.
Answer: A
NEW QUESTION 24
Under which two circumstances will a service be taken out of the slow start phase with automated slow start?
(Choose two.)
- A. The actual request rate is slower than the new service request rate.
- B. The server request rate parameters are set above 25 requests per second.
- C. The request rate has been incremented 100 times.
- D. The service does NOT receive traffic for three successive increment intervals.
- E. The percentage of traffic that the new service must receive is greater or equal to 50.
Answer: A,D
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/netscaler/12/load-balancing/load-balancing-advanced-settings/slow- start-service.html
NEW QUESTION 25
Scenario: A Citrix Architect needs to deploy three VPX instances on NetScaler SDX 11500 device to meet the following design requirements:
* Three (3) VPX instances must be provisioned on the SDX device.
* Instance 1 must be utilized for deploying NetScaler Gateway virtual server.
* Instance 2 must be utilized for deploying load balancing virtual servers for XML, Director, StoreFront, and Active Directory servers.
* Separate IP address must be utilized for the communication with XenApp environment and LDAP communication.
* Instance 3 must be used for deploying the test environment.
* In the test environment, NetScaler Gateway virtual server, load balancing virtual servers for XML, Director, StoreFront and Active Directory servers must be configured.
How many IP addresses will be required to meet these design requirements?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 26
For which three reasons should a Citrix Architect perform a capabilities assessment when designing and deploying a new NetScaler in an existing environment? (Choose three.)
- A. Establish and prioritize the key drivers behind a project.
- B. Determine operating systems and application usage.
- C. Understand the skill set of the company.
- D. Identify other planned projects and initiatives that must be integrated with the design and build phase.
- E. Assess and identify potential risks for the design and build phase.
Answer: B,D,E
NEW QUESTION 27
Scenario: A Citrix Architect needs to deploy SAML integration between NetScaler (Identity Provider) and ShareFile (Service Provider). The design requirements for SAML setup are as follows:
* NetScaler must be deployed as the Identity Provider (IDP).
* ShareFile server must be deployed as the SAML Service Provider (SP).
* The users in domain workspacelab.com must be able to perform Single Sign-on to ShareFile after authenticating at the NetScaler.
* The User ID must be UserPrincipalName.
* The User ID and Password must be evaluated by NetScaler against the Active Directory servers SFO-ADS-001 and SFO-ADS-002.
* After successful authentication, NetScaler creates a SAML Assertion and passes it back to ShareFile.
* Single Sign-on must be performed.
* SHA 1 algorithm must be utilized.
The verification environment details are as follows:
* Domain Name: workspacelab.com
* NetScaler AAA virtual server URL https://auth.workspacelab.com
* ShareFile URL https://sharefile.workspacelab.com
Which SAML IDP action will meet the design requirements?
- A. add authentication samIIdPProfile SAMI-IDP -samISPCertName Cert_1 -samIIdPCertName Cert_2
-assertionConsimerServiceURL https://sharefile.workspacelab.com/saml/acs" -samIIssuerName auth.workspacelab.com -signatureAlg RSA-SHA1-digestMethod SHA1 -encryptAssertion ON
-serviceProviderID sharefile.workspacelab.com - B. add authentication samIIdPProfile SAMI-IDP -samISPCertName Cert_1 -samIIdPCertName Cert_2
-assertionConsimerServiceURL https://sharefile.workspacelab.com/saml/acs" -samIIssuerName sharefile.workspacelab.com -signatureAlg RSA-SHA1 -digestMethod SHA1 -encryptAssertion ON
-serviceProviderID sharefile.workspacelab.com - C. add authentication samIIdPProfile SAMI-IDP -samISPCertName Cert_1 -samIIdPCertName Cert_2
-assertionConsimerServiceURL "https://auth.workspacelab.com/samIIssueName auth.workspacelab.com -signatureAlg RSA-SHA256-digestMethod SHA256-encryptAssertion ON
-serviceProviderUD sharefile.workspacelad.com - D. add authentication samIIdPProfile SAMI-IDP -samISPCertName Cert_1 -samIIdPCertName Cert_2
-assertionConsimerServiceURL https://sharefile.workspacelab.com/saml/acs" -samIIssuerName sharefile.workspacelab.com -signatureAlg RSA-SHA256 -digestMethod SHA256 -serviceProviderID sharefile.workspacelab.com
Answer: A
NEW QUESTION 28
A Citrix Architect needs to make sure that maximum concurrent AAA user sessions are limited to 4000 as a security restriction.
Which authentication setting can the architect utilize to view the current configuration?
- A. AAA Parameters
- B. AAA Virtual Server
- C. Global Session Settings
- D. Active User Session
Answer: C
Explanation:
Explanation/Reference: https://www.carlstalhood.com/category/netscaler/netscaler-11-1/netscaler-gateway-11-1/
NEW QUESTION 29
Scenario: A Citrix Architect needs to design a new NetScaler Gateway deployment to provide secure RDP access to backend Windows machines.
Click the Exhibit button to view additional requirements collected by the architect during the design discussions.
To meet the customer requirements, the architect should deploy the RDP proxy through ______ using a________ solution. (Choose the correct option to complete the sentence.)
- A. ICAProxy; stateless gateway
- B. CVPN: single gateway
- C. CVPN, stateless gateway
- D. ICAProxy: single gateway
Answer: D
NEW QUESTION 30
Scenario: A Citrix Architect has configured NetScaler Gateway integration with a XenApp environment to provide access to users from two domains: vendorlab.com and workslab.com. The Authentication method used is LDAP.
Which two steps are required to achieve Single Sign-on StoreFront using a single store? (Choose two.)
- A. Configure Single sign-on domain in Session profile 'userPrincipalName'.
- B. Configure SSO Name attribute to 'userPrincipalName' in LDAP Profile.
- C. Do NOT configure SSO Name attribute in LDAP Profile.
- D. Do NOT configure sign-on domain in Session Profile.
Answer: B,C
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/storefront/3-12/plan/user-authentication.html
NEW QUESTION 31
Which step does a Citrix Architect need to ensure during the Define phase when following the Citrix Methodology?
- A. Existing networking infrastructure is ready.
- B. Testing steps were integrated.
- C. The project manager agrees with road map timelines.
- D. The redundancy deployment decision was made.
- E. A phased roll out was completed.
Answer: D
NEW QUESTION 32
Scenario: A Citrix Architect needs to design a new NetScaler Gateway deployment to provide secure RDP access to backend Windows machines.
Click the Exhibit button to view additional requirements collected by the architect during the design discussions.
To meet the customer requirements, the architect should deploy the RDP proxy through _______, using a
_________ solution. (Choose the correct option to complete the sentence.)
- A. ICAProxy; single gateway
- B. ICAProxy, stateless gateway
- C. CVPN; stateless gateway
- D. CVPN; single gateway
Answer: D
NEW QUESTION 33
Scenario: A Citrix Architect needs to assess an existing NetScaler multi-site deployment. The deployment is using Global Server Load Balancing (GSLB) configured in a parent-child configuration.
Click the Exhibit button to view the diagram of the current GSLB configuration and parent-child relationships, as well as the status of the sites and the connectivity between them.
Based on the displayed configuration and status, Chil_site1_______ a connection from _______. (Choose the correct option to complete the sentence.)
- A. accepts; SiteP3; becomes its child site
- B. does NOT receive; SiteP2 and SiteP3; remains a child site of SiteP1
- C. rejects; SiteP3; remains a child site of SiteP1
- D. rejects; SiteP2 and SiteP3; remains a child site of SiteP1
- E. accepts; SiteP2; becomes its child site
- F. rejects; SiteP2; remains a child site of SiteP1
Answer: B
NEW QUESTION 34
Scenario: A Citrix Architect needs to configure a full VPN session profile to meet the following requirements:
* Users should be able to send the traffic only for the allowed networks through the VPN tunnel.
* Only the DNS requests ending with the configured DNS suffix workspacelab.com must be sent to NetScaler Gateway.
* If the DNS query does NOT contain a domain name, then DNS requests must be sent to NetScaler gateway.
Which settings will meet these requirements?
- A. Split Tunnel to ON, Split DNS Local
- B. Split Tunnel to OFF, Split DNS Remote
- C. Split Tunnel to OFF, Split DNS Both
- D. Split Tunnel to ON, Split DNS Remote
Answer: A
NEW QUESTION 35
Scenario: Based on a discussion between a Citrix Architect and a team of Workspacelab members, the MPX Logical layout for Workspacelab has been created across three (3) sites.
The requirements captured during the design discussion held for a NetScaler design project are as follows:
* Two (2) pairs of NetScaler MPX appliances deployed in the DMZ and internal network.
* High Availability will be accessible for each NetScaler MPX
* The external NetScaler MPX appliance will be deployed in multi-arm mode.
* The internal NetScaler MPX will be deployed in single-arm mode wherein it will be connected to Cisco ACI Fabric.
* All three (3) Workspacelab sites: Dc, NDR and DR, will have similar NetScaler configurations and design.
How many NetScaler MPX appliances should the architect deploy at each site to meet the design requirements above?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 36
Scenario: A Citrix Architect needs to design a hybrid XenApp and XenApp and XenDesktop environment which will include Citrix Cloud as well as resource locations in on-premises datacenter and Microsoft Azure.
Organizational details and requirements are as follows:
* Active XenApp and XenDesktop Service subscription
* No existing NetScaler deployment
* About 3,000 remote users are expected to regularly access the environment
* Multi-factor authentication should be used for all external connections
* Solution must provide load balancing for backend application servers
* Load-balancing services must be in Location B
Click the Exhibit button to view the conceptual environment architecture.
The architect should use ________ in Location A, and should use _________ in Location
B. (Choose the correct option to complete the sentence.)
- A. NetScaler Gateway as a Service, NetScaler ICA Proxy (cloud-licensed)
- B. No NetScaler products; NetScaler Gateway appliance
- C. No NetScaler products, NetScaler ICA Proxy (cloud-licensed)
- D. No NetScaler products, NetScaler ADC (BYO)
- E. NetScaler Gateway as a Service, no NetScaler products
- F. NetScaler Gateway as a Service, NetScaler ADC (BYO)
Answer: F
NEW QUESTION 37
Scenario: A Citrix Architect has implemented two high availability pairs of MPX 5500 and MPX 11500 devices respectively with 12.0.53.13 nc version. The NetScaler devices are set up to handle NetScaler Gateway, Load Balancing, Application Firewall, and Content Switching. The Workspacelab infrastructure is set up to be monitored with NMAS version 12.0.53.13 nc by the Workspacelab administrators. The Workspacelab team wants to implement one more pair of NetScaler MPX 7500 devices with version
12.0.53.13 nc.
The Citrix consulting team has assigned the task to implement these NetScaler devices in the infrastructure and set them up to be monitored and managed by NMAS.
The following are the requirements that were discussed during the project initiation call:
* NMAS should be configured to get the infrastructure information under sections such as HDX Insight, WEB Insight, and Security Insight.
* Configuration on the new MPX devices should be identical to MPX 11500 devices.
* Configuration changes after the deployment and initial setup should be optimized using NMAS.
* NMAS should be utilized to configure templates that can be utilized by the Workspacelab team in future deployment.
* As per the requirement from the Workspacelab team, NMAS should be store the audited data for only
15 days.
Which process should the architect utilize to ensure that the deployment of MPX 11500 devices are optimized and that it is correct, before deploying the devices in production?
- A. Under Stylebooks; Inbuilt and composite stylebook templates should be utilized prior to deployment.
- B. Under Configuration Management; Configuration Audit and Advice should be used prior to deployment.
- C. Under Configuration jobs; Configuration Audit and Advice should be used prior to deployment.
- D. Under Stylebooks; Public and composite stylebook templates should be utilized prior to deployment.
Answer: B
NEW QUESTION 38
Which encoding type can a Citrix Architect use to encode the StyleBook content, when importing the StyleBook configuration under source attribute?
- A. URL
- B. Unicode
- C. Hex
- D. base64
Answer: D
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/netscaler-mas/12/stylebooks/how-to-use-api-to-create-configuration- from-stylebooks/import-custom-stylebooks.html
NEW QUESTION 39
Scenario: A Citrix Architect needs to assess an existing on-premises NetScaler deployment which includes Advanced Endpoint Analysis scans. During a previous security audit, the team discovered that certain endpoint devices were able to perform unauthorized actions despite NOT meeting pre-established criteria.
The issue was isolated to several endpoint analysis (EPA) scan settings.
Click the Exhibit button to view the endpoint security requirements and configured EPA policy settings.
Which setting is preventing the security requirements of the organization from being met?
- A. Item 4
- B. Item 3
- C. Item 2
- D. Item 1
Answer: B
NEW QUESTION 40
Scenario: A Citrix Architect needs to assess an existing NetScaler Gateway deployment. During the assessment, the architect collected key requirements for VPN users, as well as the current session profile settings that are applied to those users.
Click the Exhibit button to view the information collected by the architect.
Which configurations should the architect change to meet all the stated requirements?
- A. Item 5
- B. Item 3
- C. Item 4
- D. Item 1
- E. Item 2
Answer: D
NEW QUESTION 41
Which markup language can a Citrix use along with NITRO API to create a StyleBook?
- A. HTML
- B. YAML
- C. GML
- D. XML
Answer: B
NEW QUESTION 42
Scenario: The Workspacelab team has configured their NetScaler Management and Analytics (NMAS) environment. A Citrix Architect needs to log on to the NMAS to check the settings.
Which two authentication methods are supported to meet this requirement? (Choose two.)
- A. AAA
- B. Certificate
- C. RADIUS
- D. TACACS
- E. SAML
- F. Director
Answer: C,D
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/netscaler-mas/12/authentication-and-rbac/configuring.html
NEW QUESTION 43
......
Certification Training for 1Y0-440 Exam Dumps Test Engine: https://www.practicematerial.com/1Y0-440-exam-materials.html
1Y0-440 Training & Certification Get Latest CCE-N : https://drive.google.com/open?id=1hLwKdfgHzeEzHCArV8uION3-a9gN4r_X
