Ultimate Guide to Prepare Free SAP E-S4HCON2022 Exam Questions & Answer [Q40-Q62]

Ultimate Guide to Prepare Free SAP E-S4HCON2022 Exam Questions and Answer

Pass SAP E-S4HCON2022 Tests Engine pdf - All Free Dumps

NEW QUESTION 40
Which are valid options to check the progress of the database migration in a Microsoft Windows environment?
There is correct answers to this question.
Response:

• A. Check the "Charts Control Center" in the SUM UI
• B. Check logs for jobs starting with "RSUPG_SGEN" in the system
• C. Check the dump size of the database export on disk
• D. Check the log files written under "SUM\abap\log"

Answer: A,D

 

NEW QUESTION 41
SUM was registered at the SAP Host Agent. Based on which information does the SAP Host Agent determine the path to the SUM directory.

• A. The path was stored in file sumabap conf during registration
• B. The path was stored to the environment of user <sid>adm during registration
• C. The path is taken from the URL entered in the browser to start SUM
• D. The path was stored in file host_profile during registration

Answer: A

 

NEW QUESTION 42
You are running an SAP ECC system with SAP_BASIS 740, non-Unicode on SAP MaxDB. Which of the following are possible paths to perform an SAP S/4HANA conversion? Note: There are 3 correct answers to this question.

• A. Unicode conversion Upgrade to SAP ECC with SAP_BASIS 750 including database migrationSAP S/4HANA conversion without database migration
• B. SAP S/4HANA conversion including database migration and Unicode conversion
• C. Unicode conversion SAP S/4HANA conversion without database migration Database migration
• D. Unicode conversion SAP S/4HANA conversion including database migration
• E. Unicode conversion Database migration SAP S/4HANA conversion without database migration

Answer: A,D,E

 

NEW QUESTION 43
What do you need to consider when performing the SI checks for an SAP S/4HANA conversion? There are 2 correct answers to this question.

• A. You need an SAP system based on AS ABAP 7.50 or above for the SI check framework.
• B. The SI checks are executed in the development system and the results are transported into the subsequent systems.
• C. Depending on the SAP S/4HANA version, there are different SI check frameworks.
• D. You need to build up a SI check framework by applying SAP notes.

Answer: C,D

 

NEW QUESTION 44
You are preparing for a standard SAP S/4HANA conversion from SAP ECC on Windows with SAP MaxDB to SAP S/4HAN. You are performing the corresponding maintenance transaction with the Maintenance Planner. Which kernels do you need to select for the SAP S/4HANA conversion?
There are 2 correct answers to this question.

• A. Kernel for source release, Windows, SAP MaxDB
• B. Kernel for target release, Linux, SAP HANA
• C. Kernel for target release, Windows, SAP MaxDB
• D. Kernel for target release, Windows, SAP HANA

Answer: A,D

 

NEW QUESTION 45
How does SUM recognize modification adjustment transports from predecessor systems?
Please choose the correct answer.
Response:

• A. By searching for transport requests that are assigned to the project SAP_ADJUST
• B. By searching for transport requests named <SID>K0<number>
• C. By searching for transport requests in the file umodauto.Ist
• D. By searching for transport requests in DIR_TRANS, subdirectory "transport"

Answer: C

 

NEW QUESTION 46
You want to perform custom code check via ABAP test cockpit in preparation of your SAP S/4HANA conversion? What kind of SAP System can you use to generate the custom code migration worklist?

• A. AA
• B. A Standalone SAP system with ABAP 7.51 or above
• C. An SAP S4HANA 1709 sandbox system

Answer: B,C

 

NEW QUESTION 47
During a DMO procedure with SUM, after which phase is the repository first available on the target database?
Please choose the correct answer.
Response:

• A. Downtime migration (EU_CLONE_MIG_DT_RUN)
• B. Uptime migration (EU_CLONE_MIG_UT_RUN)
• C. Shadow repository creation (EU_IMPORT*)
• D. ParaUel distribution (PARDIST_SHD)

Answer: B

 

NEW QUESTION 48
What are the benefits of using the Benchmarking option of the DMO for SUM?
There are 2 correct answers to this question.
Response:

• A. You can record the modification adjustment during migration and use the transports in the next runs.
• B. You can verify that the content of the download directory matches the stack.XML file.
• C. You can obtain migration duration files that can be used to optimize the next runs from a previous benchmark run.
• D. You can find the optimal number of parallel R31oad processes by monitoring host performance.

Answer: A,D

 

NEW QUESTION 49
What is the minimum SAP_BASIS release of an SAP ECC system that can be converted to an SAP S/4HANA Server?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: D

 

NEW QUESTION 50
Which Guides contain information about SUM phases starting with "EU_CLONE_"?
There are 2 correct answers to this question.
Response:

• A. The Application Guide
• B. The major SUM Guide
• C. The DMO Guide
• D. The SAP S/HANA Conversion Guide

Answer: C,D

 

NEW QUESTION 51
You are performing an SAP S/4HANA conversion. You are in the BIND_PATCH phase of the Configuration roadmap step. For some software components, you find entries in the Calculated level column. What does the Calculated level indicate for those software components?

• A. The SAP support packages that will be bound to the conversion
• B. The SAP support packages of the support package stack, calculated by the maintenance planner
• C. The SAP support packages contained in the upgrade media, calculated by the maintenance planner
• D. The SAP support packages in the download directory that are newer than the selected support package stack

Answer: D

 

NEW QUESTION 52
What is the main purpose of performing benchmark runs for an SAP S/4HANA conversion?

• A. To optimize the activation
• B. To optimize the conversion
• C. To optimize the migration
• D. To optimize the main import

Answer: C

 

NEW QUESTION 53
Unicode migration ECC on MaxDB to HANA in scale out what should we consider.

• A. A
• B. DMO can only be run with systems NW740 or NW731
• C. Target DB size will increase temporarily

Answer: B,C

 

NEW QUESTION 54
Regarding an SAP Upgrade, What does the major SAP Note for the version of SUM you are using usually contain?

• A. AA
• B. The link to different patch levels to SUM
• C. An overview about possible upgrade paths
• D. The corrections to the SUM Guide

Answer: B,C,D

 

NEW QUESTION 55
What is the different between the benchmaking and the repetition option of the Database Migration Option (DMO) of SUM?

• A. The repetition option allows you to run the migration without a shadow system
• B. The benchmaking option allows you to repeat the uptime migration
• C. The benchmaking option allows you to migration a specified set of tables
• D. The repetition option allows you to repeat the complete migration

Answer: C

 

NEW QUESTION 56
You are performing an SAP S/4HANA conversion with DMO as an inplace migration. How does SUM transfer the data by default from the source database to the target database during the migration?

• A. Using R3load and file transfer
• B. Using R3load and network socket connection
• C. Using R3load and memory pipes
• D. Using work processes and network socket connection

Answer: C

 

NEW QUESTION 57
Which additional configuration options are offered by SUM when selecting "Switch expert mode on" in main configuration option "Standard"?
There are 2 correct answers to this question.
Response:

• A. Choose the instance number of the shadow instance.
• B. Reuse a profile for the shadow instance from a previous run.
• C. Keep archiving on during the whole procedure.
• D. Use the Near Zero Downtime Maintenance Technology (NZDM).

Answer: A,B

 

NEW QUESTION 58
You are running an SAP ECC system. For which of the following activities does SUM allow you to use the Near Zero Downtime Maintenance (NZDM) capabilities?
There are 3 correct answers to this question.
Response:

• A. Apply SAP Support Packages.
• B. Perform an SAP S/4HANA conversion including DMO.
• C. Apply an Enhancement Package.
• D. Use DMO for SUM.
• E. Upgrade the SAP system.

Answer: A,C,E

 

NEW QUESTION 59
What SAP systems can you use for the ABAP Test Cockpit (ATC) to perform the custom code analysis for an SAP S/4HANA conversion? Note: There are 2 correct answers to this question.

• A. SAP S/4HANA Server 1809 and above
• B. SAP ECC system from SAP ERP 6.0 EHP 8
• C. Standalone AS ABAP with SAP_BASIS 752 and above
• D. SAP Solution Manager 7.2

Answer: A,C

 

NEW QUESTION 60
Which step can be optimized when you provide the MIGRATE_DT_DUR.XML file to SUM?

• A. Silent data migration (SDM)
• B. Shadow on target creation
• C. Downtime migration
• D. Downtime conversion

Answer: C

 

NEW QUESTION 61
When using the DMO of SUM, which files can be handled by SUM in the download directory?
There are 2 correct answers to this question.
Response:

• A. Parameter file SAPup_add.par
• B. MIGRATE J5T_DUR_XML file from a previous run
• C. Breakpoint configuration file SAPUPPHAS.BRK
• D. Stack XML file calculated by the Maintenance Planner

Answer: B,D

 

NEW QUESTION 62
......

SAP Certified Technology Specialist - SAP S/4HANA Conversion and SAP System Upgrade Practice Tests 2022 | Pass E-S4HCON2022 with confidence!: https://drive.google.com/open?id=1GjlHPnb2cs9lQRph6IzarYeVbCpFa2lE

Online Exam Practice Tests with detailed explanations!: https://www.practicematerial.com/E-S4HCON2022-exam-materials.html