100% Pass Your 5V0-41.20 Exam Dumps at First Attempt with PracticeMaterial
Penetration testers simulate 5V0-41.20 exam PDF
Topics of VMware 5V0-41.20: VMware vSAN 6.7 Specialist Exam
Candidates must know the exam topics before they start preparation. Because it will really help them to hit the core. Our 5V0-41.20 dumps will include the following topics:
1. vSAN Architectures and Technologies
- Describe vSAN requirements
- Define vSAN stretched cluster architecture requirements
- Demonstrate how vSAN stores and protects data
- Compare the architectural requirements of a vSAN 2-node cluster and a stretched cluster
- Define vSAN space efficiency features
2. Products and Solutions
3. Planning and Designing
- Design a vSAN cluster
- Define and demonstrate vSAN design considerations
- Explain interoperability with vSphere features
- Use vSAN design and sizing tools
- Define which VMware solutions integrate with vSAN
4. vSAN Installation, Configuration, and Setup
- Objective 4.4 â Configure vSAN stretched cluster and 2-node configurations
- Objective 4.2 â Create and manage disk groups
- Objective 4.3 â Configure and validate vSAN services
- Configure and validate a vSAN configuration
5. Performance-tuning, Optimization, and Upgrades
6. Troubleshooting and Repairing a vSAN solution
- Evaluate performance information in the UI and using CLI
- Determine vSAN Health using vSphere Host Client, ESXCLI, and RVC
- Interpret vSAN Health warnings
- Identify failure scenarios
- Manage hardware replacement
7. vSAN Administrative and Operational Tasks
- Describe the operational characteristics/differences between vSAN 2-node architecture and stretched cluster
- Explain how to utilize TRIM and UNMAP from vSAN and guest perspective
- Patch or upgrade a vSAN cluster
- Interpret vSAN capacity terms
- Explain how to add capacity to a vSAN cluster
- Create, update, and modify vSAN policies and apply them to objects
- Describe vSAN data placement changes
- Describe effects of maintenance mode options
- Evaluate vSAN performance metrics
- Explain encryption processes
How to Prepare For VMware 5V0-41.20: VMware SD-WAN Troubleshoot Exam
Preparation Guide for VMware 5V0-41.20: VMware SD-WAN Troubleshoot Exam
Introduction
The VMware vSAN 6.7 Specialist exam is for professionals with 6-12 months of hands-on experience configuring, handling, and developing vSphere and vSAN. There are no clear prerequisites for the VMware 5V0-41.20 Course, although you should be acquainted with the principles and technology relevant to virtual machine implementation and administration. You are in control of critical Application developments that cover various platforms and ecosystems as an HTML5 VMware 5V0-41.20 administrator. You work together as a team and excel in a fast-paced world. You manage the application life cycle, build the user interface with HTML5, format it with CSS, and code it with JavaScript.
This exam assesses the knowledge of Core Application Development Concepts, Creating Application Development Objects, and Managing an Application Development Environment. Certification verifies your abilities and experience in the fields in which you prefer to serve. These certifications are available from a variety of suppliers on the market. If an applicant wishes to operate on 5V0-41.20: VMware vSAN 6.7 Specialist and demonstrate his skills, VmWare offers a certification. This VMware vSAN 6.7 Specialist Individuals Qualification 5V0-41.20 A candidate’s skills in 5V0-41.20 exam test Technology can be validated by certification.
In this guide, we will cover the 5V0-41.20 dumps, and all aspects of the 5V0-41.20 practice exams.
NEW QUESTION 17
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
A network administrator decides to deploy a local Checkpoint VNF appliance on the Edge in London to cut back on unnecessary traffic towards the NY hub location.
The Checkpoint VNF and associated security services were successfully deployed at the London Branch.
Users are now are complaining that Webpages are extremely slow to load, just like before.
What should the administrator do?
- A. Disable and redeploy the VNF with lower memory requirements.
- B. Reboot the Edge, as this is a requirement in the deployment of a Security VNF.
- C. Verify to see if a firewall rule in the Edge is set to allow traffic to the Checkpoint VNF.
- D. Check the flow records in Remote Diagnostics.
Answer: A
NEW QUESTION 18
Scenario 2:
After completing the branch activation activities for all required branches, the administrator attempts to test connectivity between the various branches and between the hubs and branches- The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
The tunnel from the Dallas site to the Seattle hub is not coming up.
What are two things that should be checked to determine the issue? (Choose two.)
- A. Hub WAN Interface might be behind a firewall.
- B. Dynamic Branch to Branch is not enabled.
- C. Spoke Edge and Hub Edge are two different Edge models.
- D. Spoke Edge and Hub Edge have a mismatched certificate.
Answer: C,D
NEW QUESTION 19
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A network administrator has received an email from the applications development team requesting connectivity to their AWS VPC.
The administrator has configured the tunnel via the VMware SD-WAN Gateway. The tunnel status icon has not turned green.
Where are two places the administrator must check? (Choose two.)
- A. Determine if the NVS has been enabled and assigned to a profile.
- B. Determine if the DH parameter on the Edge has been configured.
- C. Determine if the PSK is mismatched between the AWS side and the VeloCloud Gateway.
- D. Determine if the PSK is mismatched between the AWS side and the VeloCloud Edge.
Answer: C,D
NEW QUESTION 20
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed thatduring certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
Users at the Dallas Branch are complaining that downloads/uploads from Office365 are slow. Working in Teams has been providing slow responses. The Internet circuit is 100Mbps while the MPLS Circuit is
45Mbps. Upon troubleshooting, the network administrator has noticed the traffic is Backhauling through the Seattle hub for all internet traffic.
How should the network administrator resolve the issue?
- A. Leave the system as is, the gateways will resolve the issues after doing 15 minutes of link qualification.
- B. Leave the system as is, the hubs will auto-rebalance tunnels after doing 15 minutes of link qualification.
- C. Advertise public routes to Office365 and Teams through the New York Hub.
- D. Prevent the hub from advertising a default route.
Answer: C
NEW QUESTION 21
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
Where can the network administrator check to see what routes are present on the London-site Edge?
- A. Log into the VCO > Test & Troubleshoot > Remote Diagnostics > Run "List Paths"
- B. Log into the VCO > Configuration > Overlay Flow Control
- C. Log into the VCO > Test & Troubleshoot > Remote Diagnostics > Run "Route Table Dump"
- D. Log into the VCO > Monitoring > Overlay Flow Control
Answer: C
NEW QUESTION 22
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A network administrator is investigating connectivity issues between Chicago and San Jose. The administrator browses to the Overlay Flow Control (OFC) window and notices that the screen is blank with no routes shown in the OFC.
What is a possible reason for this?
- A. There is an invalid MTU configuration at Chicago.
- B. Cloud VPN for the Edges / Profiles is not enabled.
- C. OSPF or BGP is not enabled.
- D. The routing table on the Edges has not been initialized.
Answer: B
NEW QUESTION 23
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected lo. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
Users are complaining that web pages to certain web sites are very slow to load and at times unresponsive. The network administrator has verified that the traffic is going correctly out the underlay.
What should the administrator check next?
- A. Verify if Path-MTU Discovery is disabled.
- B. Verify if routes to Gateways are present in the Overlay Flow Control (OFC).
- C. Verify if there is latency, loss, or jitter on the underlay.
- D. Verify the Business Policy flows are matching.
Answer: A
NEW QUESTION 24
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot gel to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A business policy is created and saved.
How can the network administrator verify the business policy is working?
- A. Select a VCE > Test & Troubleshoot > Remote diagnostics and select List Active flows and check the flows to see what Business policy is applied under the Business policy column.
- B. Check under the Monitor > Business Priority tab for Business policy statistics.
- C. Check under Monitor > Applications tab and check the listing of applications at the bottom of the screen and the category of the type of traffic there.
- D. Executing Route table dump under VCE > Test St Troubleshoot > Remote Diagnostics and select Route Table dump and look for business policy applied in the Route table Dump stats.
Answer: D
NEW QUESTION 25
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing; internal and external applications.
Exhibit.
A network administrator is configuring several branches to prefer a single prefix, 10.20.11.0/24, from the Seattle hub over the New York hub for various application performance reasons.
What are two effective ways the administrator can accomplish this? (Choose two.)
- A. Modify the AS Path in New York to be longer for 10.20.11.0/24.
- B. In the hub preferred order in the profile, set the Seattle hub to be preferred over New York.
- C. In the OFC 10.20.11.0/24, modify the preferred exit point to be Seattle and pin the route.
- D. Modify the AS Path in New York to be shorter for 10.20.11.0/24.
Answer: B,C
NEW QUESTION 26
Scenario 2:
After completing the branch activation activities for ail required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certconfigurations have been complete. The administrator also observed that several reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure thatall sites can talk to each other and all resources are accessible.
Exhibit.
A network administrator has been told that Dallas needs some high-availability in the event that the SD-WAINJ Edge goes offline for whatever reason. There is limited budget so the administrator must use the other available CE router as a fallback mechanism. The administrator will use VRRP to provide HA. When configuring VRRP, the SD-WAN Edge service restarted.
What caused this behavior?
- A. The device is faulty and will need a replacement.
- B. The administrator failed to specify the Edge Type as a VeloCloud Active Standby Pair.
- C. The administrator failed to specify the Edge Type as a VeloCloud Cluster.
- D. This is an expected behavior.
Answer: D
NEW QUESTION 27
Scenario 2:
After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
A network administrator has configured a Business Policy to send a specific application directly out an underlay interface. Users have complained of slow responses for that application. While troubleshooting, the network administrator finds the traffic is actually taking an overlay path to another SD-WAN Edge.
What is causing this behavior?
- A. uI has been configured forcing traffic into the underlay towards the hub.
- B. Internet Backha.
- C. The other Edge location is advertising a secure route for the application's subnet.
- D. Configuring Business Policy Direct settings have no affect on traffic flows.
- E. The underlay path is not available forcing traffic into the overlay.
Answer: A
NEW QUESTION 28
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
When checking connectivity from the San Jose branch, all users report that they can reach certain resources at the main data center. They are unable to reach locations elsewhere. The network administrator investigates and first looks at the Overlay Flow Control (OFC) Table.
What should the network administrator look for next to determine what the issue might be?
- A. Determine if OSPF has been configured on the MPLS Routers at the hub.
- B. Check Test & Troubleshoot and review a route table dump of the NY hub site.
- C. Check the Global Segment Configuration to see if it has the Routing Flag enabled.
- D. Check with the local network administrator to see if the routes for the SD-WAN sites are present in San Jose's branch router.
Answer: C
NEW QUESTION 29
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
A network administrator wants to achieve better high-availability and network reconvergence between LAN-side BGP Networks and the hub Edges in New York.
What must the administrator do?
- A. Nothing, the system will auto-rebalance connections and will provide sub-second convergence.
- B. Modify the Keep Alive and Hold timers to the lowest possible values ensuring the Keep Alive timer is 3 times more than the Hold timer.
- C. Modify the Keep Alive and Hold timers to the lowest possible values ensuring the Hold timer is 3 times more than the Keep Alive timer.
- D. Modify the Connect and Hold timers to the lowest possible values ensuring the Hold timer is 3 times more than the Connect timer.
Answer: A
NEW QUESTION 30
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
Users at the London site are complaining of various intermittent issues around websites not loading, or applications being remotely accessed disconnecting sporadically and reconnecting after a few minutes. The network administrator does not see anything strange on the Edge overview page and decides to check if the CPU or memory have been hitting close to 100%.
Where should the administrator verify this information?
- A. In the VCO > Monitor > Click London_Site01 > Click the System Tab
- B. In the VCO > Remote Troubleshooting > Remote Actions > System Status
- C. In the VCO > Monitor > Alerts
- D. In the VCO > Test 8c Troubleshoot > Remote Diagnostics > System Status
Answer: A
NEW QUESTION 31
......
How much VMware 5V0-41.20: VMware vSAN 6.7 Specialist Exam Cost
The price of the VmWare vSAN 6.7 Specialist exam is $250 USD. For more information related to exam price, please visit VmWare website as prices of VmWare exams fees vary country wise.
All 5V0-41.20 Dumps and Training Courses: https://www.practicematerial.com/5V0-41.20-exam-materials.html
